ATMEL Logo
Atmel Driven: Powered by Passion. Fueled by Innovation.

 

With our dedication and passion for making your automotive designs a success, we are constantly rolling out new products that are designed to address your challenges and help wow your customers. Be sure to check back often on our latest offerings:

 

Latest Offerings:

ATA6631 SBC (system basis chip) – our 4th generation of fully integrated LIN transceiver, designed according to the LIN specification 2.0, 2.1, 2.2A and SAEJ2602-2, with a low-dropout voltage regulator 3.3V/85mA. The combination of a voltage regulator and a bus transceiver makes it possible to develop simple but powerful slave nodes in LIN bus systems.

ATA663254 SBC (system basis chip) – our 4th generation of fully integrated LIN transceiver, designed according to the LIN specification 2.0, 2.1, 2.2, 2.2A and SAEJ2602-2, with a low-dropout voltage regulator 5V/85mA. The combination of a voltage regulator and a bus transceiver makes it possible to develop simple but powerful slave nodes in LIN bus systems.

ATA663203VR (voltage regulator) – a low-dropout 5V/85mA voltage regulator providing footprint compatibility with our ATA663254 LIN SBC’s enables customers to design LIN / non LIN applications with same PCB just as an assembly option.

ATA6560 CAN Trx (Transceiver) – a high speed CAN transceiver with silent mode (Receive only) is fully ISO 11898-2,-5, SAE J2284 compliant. With data-rates up to 5Mbit/s the device is suitable for use in CAN flexible data-rate (FD) applications. Parts are available in SO8 package as well as DFN8 package with wettable flanks.

ATA6561 CAN Trx (Transceiver) –a high speed CAN transceiver compatible to 3.3V and 5V microcontrollers is fully ISO 11898-2,-5, SAE J2284 compliant. With data-rates up to 5Mbit/s the device is suitable for use in CAN flexible data-rate (FD) applications. Parts are available in SO8 package as well as DFN8 package with wettable flanks.

mXT1188S and mXT1664S – new automotive-qualified maXTouch S controllers for larger screen (up to 14” diameter) to enable single layer shieldless touch sensors in car centerstacks.

ATxMega64D3 Automotive – 8/16-bit AVR Microcontroller, 64KB Flash, 64-pin, automotive-qualified

ATTiny1634 Automotive – 8-bit AVR Microcontroller, 16KB Flash, 20-pin, automotive-qualified

 

Key Offerings:

In Vehicle Networking

ATA664251 – an SiP combining a 16K Flash Microcontroller with LIN Transceiver, 5V Regulator, Watchdog, 8-channel High Voltage Switch / LED Interface with High Voltage Current Sources, 16-bit SPI. Ideal for complete LIN-bus node applications.

 

Car Access

ATA5782 – Low-power RF Receiver for RKE, PEG, RS and TPMS Systems. Firmware Included in ROM, Additional Flash Option
ATA5833 – Cost-optimized RF Transceiver for RKE, PEG, RS and TPMS Systems
ATA5791 – Embedded AVR® Microcontroller Including RF Transmitter and Complete LF Functionality for Passive Entry/Passive Start Keys
ATA5774C – UHF ASK/FSK 429-439MHz Transmitter with ATtiny44V Microcontroller

 

Touch

mXT224S Automotive – This touch controller addresses smaller touchscreens and touchpads with a size of 5-6 inches in diameter. Qualified for automotive from -40°C to +85°C, it supports shieldless sensors and gloved operation. It embeds sophisticated filter algorithms, gestures and suppression of unintended touches.
mXT336S Automotive – It is optimized for 7-inch touchscreens in diameter. Qualified for automotive from -40°C to +85°C, it supports shieldless sensors and gloved operation. It embeds sophisticated filter algorithms, gestures and suppression of unintended touches.