Video

The evaluation kit for the CryptoAuthentication™ AT88SA102S device includes an AT90USB162 microcontroller and a convenient USB interface that lets designers learn about and experiment with CryptoAuthentication on their PCs. This kit gives engineers, developers, and decision makers a tool to develop applications to protect confidential files, encrypt downloads, perform two-factor logons, or prevent software piracy. Developers can use the provided 3-pin interface to connect the CryptoAuthentication device directly to their existing project. Complete source code for the Atmel AVR® is available, along with a schematic, Gerber files, and a bill of materials. This kit replaces the Atmel AT88SA-ADK1.

Mature tool; replaced with AT88CK440RED.

Mid-range development tool for Atmel 8-bit and 32-bit AVR microcontrollers with on-chip debugging for source level symbolic debugging, NanoTrace (if supported by the device) and device programming.

For more information, please visit the Online User Guide.

Check distributor inventory

Development tool for applications that protect confidential files, encrypt downloads, perform two-factor logons, authenticate products, and prevent software piracy. The starter kit includes a microbase board with a USB interface that lets designers learn and experiment on their PCs. It includes a daughterboard that interfaces to the microbase via a 10-pin header. The daughterboard has a single 3-pin SOT23 socket for development. Software developed on the PC can also serve as the base for code to be ported to an embedded microcontroller. Source code can also be edited to integrate with ARM or other platforms. This kit uses a modular approach, enabling the daughterboard to connect directly to an STK series AVR development platform to easily add security to applications. An optional adapter kit is also available when the 10-pin header on the daughterboard requires a different pin out. Theeasy-to-use CryptoAuthentication™ utility demonstrates the functionality of the CryptoAuthentication device.

Development tool for applications that protect confidential files, encrypt downloads, perform two-factor logons, authenticate products, and prevent software piracy. The kit includes a microbase board with a USB interface to connect to a PC, and daughterboard that interfaces to the microbase via a 10-pin header. The daughterboard has two 3-pin SOT23 sockets for either client or client-host development. Software developed on the PC can also serve as the base for code ported to an embedded microcontroller. Source code can also be edited for integration with ARM or other platforms. This kit uses a modular approach, enabling the daughterboard to connect directly to an STK series AVR development platform to easily add security to applications. An optional adapter kit is also available if the 10-pin header on the daughterboard requires a different pin out. The easy-to-use Atmel CryptoAuthentication™ utility demonstrates the functionality of the CryptoAuthentication device.

A complete touch development kit for buttons, sliders, and wheels. It allows designers to experiment with Atmel touch technology and serves as the easiest way to analyse and validate touch products. Both Atmel QTouch® and QMatrix® acquisition methods are supported. The kit uses QTouch Studio as its front-end software. It includes a USB-powered interface board, three MCU boards (ATtiny88, ATmega324PA, and ATxmega128A1), three sensor boards that support up to 64-channels, and cables.

Check distributor inventory

Atmel SAM-ICE™ is a JTAG emulator designed for Atmel SAMA5, SAM3, SAM4, SAM7 and SAM9 ARM® core-based microcontrollers, including the Thumb® mode. It supports download speeds up to 720K Bytes per second and maximum JTAG speeds up to 12 MHZ. It also supports Serial Wire Debug (SWD) and Serial Wire Viewer (SWV) from SAM-ICE hardware V6.

Check distributor inventory

The ATmega128RFA1 evaluation kit accelerates development, debugging, and demonstration of IEEE 802.15.4-compliant wireless applications. The kit contains two evaluation boards for the Atmel ATmega128RFA1 device, which covers the 2.4GHz ISM bands for use with the STK600 Starter Kit.

Check distributor inventory

The ATmega256RFR2 evaluation kit demonstrates the unique performance of the latest Atmel 2.4GHz System-on-chip solution, ATmega256RFR2. The kit is the hardware platform for evaluating complete wireless system solutions including wireless stacks such as IPv6/6LoWPAN, ZigBee RF4CE and ZigBee PRO. The kit is also an ideal platform evaluation and development of various proprietary sytems using low level drivers or the new Atmel Lightweight Mesh Stack.

The kit contains two radio controller boards (RCB) assembled with the ATmega256RFR2. The RCB is powered by two AAA batteries and forms a fully functional and portable wireless node. The kit also includes a sensor terminal board (STB) for connection to a PC/laptop, and one Key Remote Control Board enabling demo/evaluation of remote control applications like ZigBee Remote Control and ZigBee Light Link.

Check distributor inventory

An ideal kit for evaluating the Atmel Touch Library implemented on the ATmega88. It comes preloaded with software for two buttons, one slider, and one rotor and includes a mini-B plug to std-A plug ~1.5m USB2.0 cable. The kit is designed using the QTouch acquisition method. Designers can create and upload other configurations to the kit using of an external programmer such as ATAVRISP mkII or AVR Dragon.

Check distributor inventory

An ideal kit for evaluating the Atmel Touch Library implemented on the Atmel ATtiny88. It comes preloaded with software for four buttons and one rotor and includes a mini-B plug to std-A plug ~1.5m USB2.0 cable. The kit is designed using the QMatrix acquisition method. Designers can create and upload other configurations to the kit using of an external programmer such as ATAVRISP mkII or AVR Dragon.

Check distributor inventory

A QTouch® Library-supported add-on board for the Xplain kit that adds capacitive touch functionality. The kit demonstrates how QTouch solutions require very simple circuit design and few external components. The kit features one slider, one wheel, and two buttons, and has eight through-holes to allow the LEDs on the board to remain visible from the front. The Xplain kit must be bought separately.

NOTE:
The QTouch Xplained is only available as a bundle consisting of AVR Xplain, Display Xplained and QTouch Xplained.

Check distributor inventory

The REB212BSMA-EK demonstrates the unique performance and rich feature set of the Atmel® 700/800/900MHz RF transceiver AT86RF212B combined with the leading edge ATxmega256A3 microcontroller. The REB212BSMA-EK contains two sets of Radio Extender Board (REB), Controller Base Board (REB-CBB) and USB cables to enable PC connectivity.

The REB is assembled with an AT86RF212B and one SMA antenna, demonstrating the unrivaled RF performance of the AT86RF212B in the sub-1GHz regional frequency bands. The REB connected to the REB-CBB forms a fully functional, battery powered wireless node.

Check distributor inventory

The REB231ED-EK demonstrates the unique performance and rich feature set of the 2.4GHz RF transceiver AT86RF231 combined with the leading edge ATxmega256A3 microcontroller. The REB231ED-EK contains two sets of Radio Extender Board(REB), Controller Base Board (REB-CBB) and RS232 cable to enable PC connectivity.

The REB is assembled with an AT86RF231 and two ceramic antennas, demonstrating the unrivaled hardware based Antenna Diversity feature to improve radio link robustness in adverse RF environments. The REB connected to the REB-CBB forms a fully functional, battery powered wireless node.

The kit is supported by Atmel BitCloud stack - a ZigBee PRO certified platform - and Atmel BitCloud Profile Suite - a certified testing and development solution for public application profiles like ZigBee Smart Energy and Home Automation. The kit is thus an ideal platform for design and prototyping of ZigBee-compliant wireless applications. The REB-CBB boards are also equipped with serial DataFlash, which enables seamless evaluation of over-the-air upgrade functionality provided by BitCloud.

Check distributor inventory

The REB231FE2-EK demonstrates the unique performance and rich feature set of the Atmel 2.4GHz radio transceiver AT86RF231 combined with the leading edge ATxmega256A3 microcontroller. The reference design utilizes the SE2431L RF front end module to demonstrate industry leading link budget of more than 125dB.

Check distributor inventory

The Atmel REB232ED-EK demonstrates the unique performance and feature set of the Atmel® 2.4GHz radio transceiver AT86RF232 combined with the leading edge Atmel ATxmega256A3 microcontroller.

AT86RF232 is a feature-optimized wireless transceiver for consumer applications in the unlicensed 2.4GHz ISM band. It is ideal for, low complexity, peer-to-peer wireless applications like remote controls, health and fitness devices, toys, game controllers, and others. Radio transceiver features like hardware accelerators for IEEE 802.15.4 signal processing or advanced features like AES and antenna diversity can easily be evaluated with the REB232ED-EK kit. In addition it serves as a reference design for derived product developments.

Check distributor inventory

The REB233SMAD-EK demonstrates the unique performance and rich feature set of the 2.4GHz RF transceiver AT86RF233 combined with the leading edge ATxmega256A3 microcontroller. The REB233SMAD-EK contains two sets of Radio Extender Board(REB), Controller Base Board (REB-CBB) and USB cable to enable PC connectivity.

The REB is assembled with an AT86RF233 and two SMA antennas, demonstrating the unrivaled hardware based Antenna Diversity feature to improve radio link robustness in adverse RF environments. The REB connected to the REB-CBB forms a fully functional, battery powered wireless node.

The kit is supported by Atmel BitCloud stack - a ZigBee PRO certified platform - and Atmel BitCloud Profile Suite - a certified testing and development solution for public application profiles like ZigBee Smart Energy and Home Automation. The kit is thus an ideal platform for design and prototyping of ZigBee-compliant wireless applications. The REB-CBB boards are also equipped with serial DataFlash, which enables seamless evaluation of over-the-air upgrade functionality provided by BitCloud.

Check distributor inventory

The evaluation kit speeds development, debugging, and demonstration for IEEE 802.15.4-compliant wireless applications.

This FCC-certified kit contains evaluation boards for Atmel AT86RF212 and the AT86RF23x families of RF transceivers, which cover the regional 700/800/900MHz and worldwide 2.4GHz ISM bands for use with the STK600. The kit includes two USB adapters equipped with 32-bit AVR UC3A microcontrollers for standalone point-to-point or packet sniffer operation.

Check distributor inventory

Atmel 2.4GHz evaluation and starter kit speeds development, debugging, and demonstration of a wide range of low-power IEEE 802.15.4, 6LoWPAN, and ZigBee wireless network applications.

The kit includes two AVR Raven boards with a 2.4GHz transceiver, on-board picoPower AVR application processors with LCD display, and one USB stick with a 2.4GHz transceiver to allow USB connections to a PC. It also includes a PC software package for wireless network setup, control, analysis, and over-the-air programming.

Check distributor inventory

The starter kit accelerates development, debugging, and demonstration for a wide range of low power wireless applications including IEEE 802.15.4, 6LoWPAN, and ZigBee networks.

The kit includes one USB stick with a 2.4GHz transceiver and a USB connector. The included AT86RF230 transceiver's high sensitivity supports the longest range for wireless products. The AT90USB1287 incorporates fast USB On-the-Go.

Check distributor inventory

The SAM3N Evaluation Kit (SAM3N-EK) enables evaluation capabilities and code development of applications running on a SAM3N device.

Check distributor inventory

This kit lets designers quickly evaluate and develop code for applications running on the Atmel SAM9261.

Check distributor inventory

This kit lets designers quickly evaluate and develop code for applications running on an Atmel SAM9263 microcontroller.

Check distributor inventory

This kit lets designers quickly evaluate and develop code for applications running on the Atmel SAM9G10.

This kit lets designers quickly evaluate and develop code for applications running on the Atmel SAM9M10 or the Atmel SAM9G45. It is delivered with free packages for Android™, Microsoft® Windows® and Linux® to enable rapid application development.

This kit lets designers quickly evaluate and develop code for applications running on the Atmel SAM9R64 and SAM9RL64 microcontrollers.

Check distributor inventory

The Atmel® UC3-A3 Xplained evaluation kit is a hardware platform for evaluating the Atmel AT32UC3A3256 microcontroller. The kit offers a range of features that enable the Atmel AVR® UC3 user to get started using AVR UC3 peripherals right away and understand how to integrate the AVR UC3 device in their own design.

NOTE: The UC3-A3 Xplained is suited for evaluation of both UC3A3 and UC3A4 microcontrollers. The two series share the same peripherals, except that the UC3A3 features a External Bus Interface (EBI) while the UC3A4 does not.
The AES peripheral of the UC3A3S/A4S and the Audio peripheral of the UC3A3AU are not supported by the device on this board. To evaluate these features please use the EVK1104S and EVK1104AU respectively.  

Check distributor inventory

The Atmel AVR Xplained kits are great platforms for early evaluation of the capabilities offered by the Atmel AVR microcontrollers. The XMEGA-A3BU Xplained contain one QTouch button sensor, three mechanical buttons, two LEDs, 3 analog sensors, a USB port, battery backup system and a 128x32 pixel FSTN LCD display.

The AVR Xplained expansion headers provide easy access to analog and digital I/O pins. The board is powered by the USB cable and equipped with the standard 10-pin JTAG header that connects to the full range of AVR debuggers.

NOTE: The XMEGA-A3BU Xplained can be used to evaluate the XMEGA A1/A3/A4 and A1U/A3U/A4U devices. The devices shares the same peripherals, but the A1, A3 and A4 devices has different pin count and hence different number of each peripherals. The A3BU devices features Battery Back-up for the RTC peripheral, which the other devices does not. The XMEGA A1 devices features an External Bus Interface (EBI) which the A3BU devices does not. To evaluate the EBI it is recommended to use the XMEGA-A1 Xplained.

Check distributor inventory

The Atmel® XMEGA-B1 Xplained evaluation kit is a hardware platform for evaluating the Atmel ATxmega128B1 microcontroller. The kit offers a range of features that enable the Atmel AVR® XMEGA® user to get started using AVR XMEGA peripherals right away and understand how to integrate the AVR XMEGA device in their own design.

Check distributor inventory

The Atmel® XMEGA-C3 Xplained evaluation kit is a hardware platform for evaluating the Atmel ATxmega384C3 microcontroller. The kit offers a range of features that enable the Atmel AVR® XMEGA® user to get started using AVR XMEGA peripherals right away and understand how to integrate the AVR XMEGA device in their own design.

Check distributor inventory

The CAN bootloader lets designers program the different memories and registers of any Atmel AT91SAM product with CAN without removing them from the system and without the need for preprogrammed applications.

Atmel SAM-BA® software provides an open set of tools for programming the Atmel SAMA5, SAM3, SAM4, SAM7 and SAM9 ARM® core-based microcontrollers.

The RF231USB-RD serves as a reference design showcasing the unique performance and rich feature set of the Atmel® AT86RF231 2.4GHz radio transceiver combined with the leading edge ATSAM3S4B microcontroller. The reference design is made available in an easy to use USB stick form factor, and comes pre-flashed with a boot loader and a full set of documentation stored on the onboard external 2Gbit flash memory.

Check distributor inventory

The amplified IEEE 802.15.4/ZigBee module with unique RF design achieves a rare combination of industry-leading range performance and low power consumption. Its small footprint of less than a square inch makes integration easy.

A built-in UFL antenna connector enables rapid design-in and supports different external antennas for many applications.

The amplified IEEE 802.15.4/ZigBee module with unique RF design achieves a rare combination of industry-leading range performance and low power consumption. Its small footprint of less than a square inch makes integration easy.

The module's non-balanced RF output minimizes the bill of materials and shortens time to market. Embedded 802.15.4/ZigBee software ensures standards-based wireless connectivity for a wide range of applications.

The low-power 802.15.4/ZigBee module combines an impressive set of features in just under half a square inch of space. Based on a solid combination of the popular Atmel ATmega1281V MCU and the latest Atmel AT86RF230 radio transceiver, this ZigBit module offers superior radio performance for price-sensitive applications.

The tool minimizes the bill of materials and shortens time to market. Embedded 802.15.4/ZigBee software ensures standards-based wireless connectivity for a wide range of applications.

Check distributor inventory

The low-power 802.15.4/ZigBee module combines an impressive set of features in just under half a square inch of space.

Based on a solid combination of the popular ATmega1281V MCU and the latest Atmel AT86RF230 radio transceiver, this module offers superior radio performance with exceptional ease of integration. It eliminates the need for costly and time-consuming RF development and shortens time to market. Embedded 802.15.4/ZigBee software ensures standards-based wireless connectivity for a wide range of applications.

Check distributor inventory

Ultra-compact, low-power, high-sensitivity, 784/868/915MHz 802.15.4/ZigBee OEM module eliminates the need for costly and time-consuming RF development. The module also minimizes the bill of materials, and shortens time to market for a wide range of standards-based wireless applications.

Embedded 802.15.4/ZigBee software ensures wireless connectivity.

This software package provides drivers, software service, libraries, and demonstration applications for Atmel AT91SAM microcontrollers. Each software module contains full source code, example of usage, documentation, and ready-to-use projects for GNU GCC, Keil, and IAR EWARM compilers.

Atmel® Lightweight Mesh software stack is an easy to use proprietary low power wireless mesh network protocol. It has been designed to address the needs of a wide range of wireless connectivity applications, including: 

• Remote control
• Alarms and security
• Automatic Meter Reading (AMR)
• Home and commercial building automation
• Toys and educational equipment

The Lightweight Mesh software stack is designed to work with all Atmel IEEE® 802.15.4 transceivers and SoCs. Currently the stack works with AVR®-based MCUs, but given its extreme portability and low resource requirements, it can be run on almost any Atmel MCU.

QTouch Library is a set of pre-compiled binaries for supported AVR and Atmel ARM-based microcontrollers. The library supports both QTouch and QMatrix acquisition methods.

The QTouch Library integrates

• The QT600 Example Project consisting of:
• • Example project for the ATtiny88 MCU board using the QTOUCH8 Panel
  • Example project for the ATxmega128A1 MCU board using the QTOUCH16 Panel
  • Example project for the ATmega324PA MCU board using the QMATRIX8x8 Panel
• Example Projects for SAM3N-EK (SAM3N Cortex M3 flash microcontroller)
• Example Projects for SAM3S-EK (SAM3S Cortex M3 flash microcontroller)

The example projects are available for both IAR and GCC compilers, and a precompiled hex or exe file is included for those who want to reflash the MCU boards without having to compile the projects themselves.

This software package provides drivers, software services and libraries, and demonstration applications for Atmel SAM9M10 and SAM9G45 microcontrollers. Each software module contains full source code, usage examples, documentation, and ready-to-use projects for the GNU GCC, Keil, and IAR EWARM compilers.

One Collaborative Studio for Embedded Design

Atmel® Studio 6 is the integrated development platform (IDP) for developing and debugging Atmel ARM® Cortex™-M processor-based and Atmel AVR® microcontroller applications. The Atmel Studio 6 IDP gives you a seamless and easy-to-use environment to write, build and debug your applications written in C/C++ or assembly code. Atmel Studio 6 supports all 8- and 32-bit AVR; the new SoC wireless family; SAM3, SAM4 and SAM D20 microcontrollers; and connects seamlessly to Atmel debuggers and development kits. Additionally, the IDP now includes two new features designed to further enhance your productivity: Atmel Gallery is an online apps store built in to Studio 6, allowing you to purchase both in-house and third-party development tools and embedded software. Atmel Spaces is a collaborative workspace where you can securely share embedded design and track progress of projects with your peers.

Learn more about Atmel Studio                                                       Studio Archive

The Atmel QTouch Studio is a PC application providing real-time visualization of the QTouch debug data stream sent from supported development and evaluation boards:

• QT600
• SAM3N-EK
• SAM3S-EK
• AVRTS2080A
• AVRTS2080B
• QTouch Xplained

QTouch Studio is built on Microsoft Visual Studio Shell and supports Microsoft Windows XP, Vista and Windows 7.