Atmel Automotive Solutions for Infotainment, HMI, Connectivity Applications

Atmel offers several products from the Atmel® maXTouch® family, known for its superior performance and rich feature set, to address automotive touchpad applications. In addition to providing multi-touch functionality, faster response time, robust operation and lower power consumption, these solutions also provide embedded functions such as gesture calculation and filter algorithms that meet strict automotive design requirements. Dedicated firmware and a high signal-to-noise ratio makes them ideally suited for very noisy environments and provide full support for gloved-hand operation on automotive touchpads. These products can be easily interfaced to an Atmel MCU to provide more complex touch post-processing or to interface to the vehicle communication network.

Block Diagram

Automotive Touchpads and Panels Diagram


Features and Benefits

Touchpads

  • Automotive qualified products — All touchscreen controllers are AEC-Q100 qualified.
  • Broad touchscreen controller portfolio — Products range from 143 up to 3432 channels, addressing everything from small touchpads up to 20-inch (50.8-cm) touchscreens.
  • Embedded DSP based touch engine — Touch acquisition in less than 10msec enables character recognition on the host processor.
  • Embedded CPU for post processing — Advanced noise filtering to support single layer, shield-less sensors, embeded single and dual-touch gestures, and the rejection of unintended touches.
  • Unlimited, unambiguous touch identification — Multi-touch support of 16 simultaneous touches.
  • High voltage mode for the highest SNR — Support gloved finger touch, finger tip, and back of finger touches.

Touch for BSW (buttons, sliders, and wheels) and proximity detection:

  • Developer's choice — QTouch Library can be used to develop single-chip solutions for many control applications, or to reduce chip count in more complex applications.
  • Multitude of combinations — Developers have the latitude to implement buttons, sliders, and wheels (BSW) in a variety of combinations on a single interface.
  • Broad controller support — QTouch Library supports Atmel | SMART™ ARM-based MCUs as well as tinyAVR®, megaAVR®, XMEGA™, and the UC3C 32-bit AVR.
  • Numerous channels — The chip supports up to 64 sense channels for maximum interface sensitivity. 256-level sliders and wheels require only three channels.
  • Three acquisition methods — The QTouch Library supports three patented capacitive touch acquisition methods: QTouchQTouchADC and QMatrix®.
  • Precise operation — Atmel Adjacent Key Suppression® (AKS®) technology enables unambiguous detection of button touches for maximum precision.
  • Prevent bounce — Full debouncing reports for touch buttons helps ensure single, clean contacts.
  • Common API — A common API across all library versions simplifies development.

Microcontrollers:

  • Automotive Qualified — Atmel® automotive microcontrollers are fully automotive-qualified (AEC Q100) and available in different temperature ranges, with some devices operating up to +150°C ambient temperature (AECQ100 Grade0).
  • “Zero Defect” Qualify — Atmel microcontrollers are fully-engineered to fulfill OEMs’ quality requirements towards zero defects.
  • Broad Portfolio — From 8-bit AVR microcontrollers up through 32-bit devices, our wide range of microcontrollers deliver the technical features, advanced architecture, and dependable design that’s right for your application.  LIN and CAN communications are both supported within the portfolio, as well as support for the emerging use of USB and Ethernet within the automobile.  This portfolio also includes complete System-in-Package (SiP) solutions which integrate a microcontroller along with a voltage regulator, a network interface, and other differentiated functions into a single cost-effective and space-saving package.
  • Impressive Performance / Power Efficiency — Leverages a long history in both real-time systems and in low-power technology. Atmel uses architectural features such as Direct Memory Access (DMA) and Event Support, and complex peripherals, such as the Peripheral Touch Controller, across the microcontroller portfolio to provide products that meet demanding performance requirements while operating within tight power budgets.
  • Complete Development Eco-System – All microcontrollers are supported by a complete set of development tools, including a low-cost option based on Atmel Studio that provides a common environment across the entire portfolio.  In addition, production-quality software is available from 3rd parties, where needed, to complete the development ecosystem.

LIN:

  • Broad portfolio — The Atmel portfolio starts with simple LIN Transceivers and progresses up to highly integrated System in Packages (SiPs) ensure that you can select the correct IC for your application.
  • Superior performance — All parts are based on the Atmel LIN IP, that delivers excellent electromagnetic interference (EMI) and electrostatic discharge (ESD) performance.
  • Maximum integration — The Atmel innovative mixed-signal BCD-on-SOI (bipolar, CMOS, DMOS on silicon-on-insulator) technology, called SMART-I.S™, is used for many body electronics and powertrain devices. It enables high integration, extended EMC performance, and high-temperature capability.

Atmel Products

Automotive MaxTouch
Touchscreen Controllers
Description
mXT224S AutomotiveThe mXT224S addresses smaller touchscreens and touchpads with a size of 5-6 inches in diameter. Qualified for automotive from -40°C to +85°C, it supports shieldless sensors and gloved operation. It embeds sophisticated filter algorithms, gestures and suppression of unintended touches.
mXT336S AutomotiveThe mXT768E addresses medium-sized touchscreens of up to 12 inches in diameter. Qualified for automotive from -40°C to +105°C, it supports shieldless sensors and gloved operation. It embeds sophisticated filter algorithms, gestures and suppression of unintended touches.
Automotive MCUsDescription
ATtiny87 Automotive

8-bit Automotive AVR Microcontroller, 8KB ISP Flash, LIN Controller

ATtiny88 Automotive8-bit Automotive AVR Microcontroller, 8KB ISP Flash, 32 Pins
ATtiny167 Automotive

8-bit Automotive AVR Microcontroller, 16KB ISP Flash, LIN Controller

ATmega32C1 Automotive

ATmega C1 Series 32KB Flash

ATmega32M1 Automotive

ATmega M1 Series 32KB Flash, PSC

ATmega64C1 Automotive

ATmega C1 Series 64KB Flash

ATmega64M1 Automotive

ATmega M1 Series 64KB Flash, PSC

AT90CAN32 Automotive

8-bit Automotive AVR Microcontroller, 32KB ISP Flash, CAN Controller

AT90CAN64 Automotive

8-bit Automotive AVR Microcontroller, 64KB ISP Flash, CAN Controller

AT90CAN128 Automotive

8-bit AVR Microcontroller, 128KB ISP Flash, CAN Controller

ATmega48PA Automotive8-bit picoPower AVR Microcontroller, 4KB Flash, 28/32-pin
ATmega88PA Automotive8-bit picoPower AVR Microcontroller, 8KB Flash, 28/32-pin

ATmega164P Automotive

8-bit Automotive AVR Microcontroller, 16KB ISP Flash

ATSAMDA1E14AARM® Cortex®-M0+ microcontroller with 16KB Flash, 4kB SRAM, 512Byte RWW Flash, 4 SERCOM, 5 Timer Counter (TC), 3 Timer Counter for Control (TCC), USB, I2S, 10 channel ADC, 2 Analog Comparators, 1 DAC, RTC, PTC, 48MHz, 26 GPIOs, QFN32
ATSAMDA1E15AARM® Cortex®-M0+ microcontroller with 32KB Flash, 4kB SRAM and 1KB RWW Flash, 4 SERCOM, 5 Timer Counter (TC), 3 Timer Counter for Control (TCC), USB, I2S, 10 channel ADC, 2 Analog Comparators, 1 DAC, RTC, PTC, 48MHz, 26 GPIOs, QFN32
ATSAMDA1E16AARM® Cortex®-M0+ microcontroller with 64KB Flash, 8kB SRAM and 2KB RWW Flash, 4 SERCOM, 5 Timer Counter (TC), 3 Timer Counter for Control (TCC), USB, I2S, 10 channel ADC, 2 Analog Comparators, 1 DAC, RTC, PTC, 48MHz, 26 GPIOs, QFN32
ATSAMDA1G14AARM® Cortex®-M0+ microcontroller with 16KB Flash, 4kB SRAM, 512Byte RWW Flash, 6 SERCOM, 5 Timer Counter (TC), 3 Timer Counter for Control (TCC), USB, I2S, 14 channel ADC, 2 Analog Comparators, 1 DAC, RTC, PTC, 48MHz, 38 GPIOs, QFN48
ATSAMDA1G15AARM® Cortex®-M0+ microcontroller with 32KB Flash, 4kB SRAM, 1KB RWW Flash, 6 SERCOM, 5 Timer Counter (TC), 3 Timer Counter for Control (TCC), USB, I2S, 14 channel ADC, 2 Analog Comparators, 1 DAC, RTC, PTC, 48MHz, 38 GPIOs, QFN48
ATSAMDA1G16AARM® Cortex®-M0+ microcontroller with 64KB Flash, 8kB SRAM, 2KB RWW Flash, 6 SERCOM, 5 Timer Counter (TC), 3 Timer Counter for Control (TCC), USB, I2S, 14 channel ADC, 2 Analog Comparators, 1 DAC, RTC, PTC, 48MHz, 38 GPIOs, QFN48
ATSAMDA1J14AARM® Cortex®-M0+ microcontroller with 16KB Flash, 4kB SRAM, 512Byte RWW Flash, 6 SERCOM, 5 Timer Counter (TC), 3 Timer Counter for Control (TCC), USB, I2S, 20 channel ADC, 2 Analog Comparators, 1 DAC, RTC, PTC, 48MHz, 52 GPIOs, TQFP64
ATSAMDA1J15AARM® Cortex®-M0+ microcontroller with 32KB Flash, 4kB SRAM, 1KB RWW Flash, 6 SERCOM, 5 Timer Counter (TC), 3 Timer Counter for Control (TCC), USB, I2S, 20 channel ADC, 2 Analog Comparators, 1 DAC, RTC, PTC, 48MHz, 52 GPIOs, TQFP64
ATSAMDA1J16AARM® Cortex®-M0+ microcontroller with 64KB Flash, 8kB SRAM, 2KB RWW Flash, 6 SERCOM, 5 Timer Counter (TC), 3 Timer Counter for Control (TCC), USB, I2S, 20 channel ADC, 2 Analog Comparators, 1 DAC, RTC, PTC, 48MHz, 52 GPIOs, TQFP64
Automotive Host ControllersDescription
AT32UC3C0512C Automotive32-bit AVR Microcontroller, 512KB Flash, 144-pin, automotive-qualified
AT32UC3C1512C Automotive32-bit AVR Microcontroller, 512KB Flash, 100-pin, automotive-qualified
AT32UC3C2512C Automotive32-bit AVR Microcontroller, 512KB Flash, 64-pin, automotive-qualified
LIN SBCDescription
ATA6622CLIN Bus Transceiver with 3.3V Regulator, Watchdog, TXD Time-out Timer, 20-pin
ATA6624CLIN Bus Transceiver with 5V Regulator, Watchdog, TXD Time-out Timer, 20-pin
ATA6626CLIN Bus Transceiver with 5V Regulator and Watchdog, no TxD Timeout Timer, 20-pin
ATA6628LIN Bus Transceiver with 3.3V Regulator and Watchdog, High-speed Mode
ATA6632314th generation LIN Bus Transceiver with Integrated Voltage Regulator 3.3V, 8-Pin
ATA6632544th generation LIN Bus Transceiver with Integrated Voltage Regulator 5.0V, 8-Pin
ATA664151LIN System Basis Chip with LIN Transceiver, 5V Regulator, Watchdog, 8-channel High Voltage Switch/LED Interface with High Voltage Current Sources, 16-bit SPI