Devices for GPS for Fleet Management, Asset-, Vehicle-, and Personal-Tracking

GPS Asset Tracking

Device
Description

BLE4.1 link controller SoC is a perfect companion to any Atmel host MCU for adding BLE connectivity or it’s ARM® Cortex®-M0 when combined with external memory can function as a standalone MCU with embedded BLE

8-bit picoPower AVR Microcontroller, 32KB Flash, 44-pin

ARM Cortex-M0 MCU with 128KB of RAM, 256KB of Flash and complete BLE4.1 protocol stack embedded in ROM

Single-chip ARM® Cortex®-M0+ based 32-bit Microcontroller with Low Power 2.4GHz Transceiver for IEEE 802.15.4 and ZigBee Applications with 256KB Flash and 28 I/O pins in a QFN48 package.

8-bit Atmel® AVR® microcontroller with 4KB Flash, 256 bytes SRAM, 128 bytes EEPROM, 20MHz/20 MIPS, two 16-bit timer/counters, one 12-bit timer/counter, RTC, USART, SPI, Two-wire Interface (I2C), 10-bit ADC, 8-bit DAC, analog comparator, accurate internal oscillators and multiple calibrated voltage references, Custom Logic, 10-bytes unique ID, and 24 pins

8-bit Atmel® AVR® microcontroller with 8KB Flash, 512 bytes SRAM, 128 bytes EEPROM, 20MHz/20 MIPS, two 16-bit timer/counters, one 12-bit timer/counter, RTC, USART, SPI, Two-wire Interface (I2C), 10-bit ADC, 8-bit DAC, analog comparator, accurate internal oscillators and multiple calibrated voltage references, Peripheral Touch Controller (PTC), Custom Logic, 10-bytes unique ID, and 14 pins

8-bit Atmel® AVR® microcontroller with 8KB Flash, 512 bytes SRAM, 128 bytes EEPROM, 20MHz/20 MIPS, two 16-bit timer/counters, one 12-bit timer/counter, RTC, USART, SPI, Two-wire Interface (I2C), 10-bit ADC, 8-bit DAC, analog comparator, accurate internal oscillators and multiple calibrated voltage references, Peripheral Touch Controller (PTC), Custom Logic, 10-bytes unique ID, and 20 pins

8-bit Atmel® AVR® microcontroller with 8KB Flash, 512 bytes SRAM, 128 bytes EEPROM, 20MHz/20 MIPS, two 16-bit timer/counters, one 12-bit timer/counter, RTC, USART, SPI, Two-wire Interface (I2C), 10-bit ADC, 8-bit DAC, analog comparator, accurate internal oscillators and multiple calibrated voltage references, Peripheral Touch Controller (PTC), Custom Logic, 10-bytes unique ID, and 24 pins

8-bit AVR Microcontroller, 1KB Flash, 8-pin, high-performance analog peripherals

8-bit AVR Microcontroller, 1KB Flash, 14-pin, high-performance analog peripherals

ARM Cortex-M0+ based microcontroller with 256KB Flash, 32KB SRAM, 48 MHz, eight 16-bit timer/counters, 6 SERCOMs, 20-channel 12-bit ADC, 10-bit DAC, 64 pins

ARM Cortex-M0+ based microcontroller with 256KB Flash, 32KB SRAM, 48 MHz, five 16-bit timer/counters, DMA, 6 SERCOMs, USB Host and Device, 20-channel 12-bit ADC, 10-bit DAC, 64 pins

32-bit AVR Microcontroller, 64KB Flash, 144-pin, SD/SDIO Card

Single-chip 8-bit Microcontroller with Low Power 2.4GHz Transceiver for IEEE 802.15.4 and ZigBee Applications with 256KB Flash and 33 I/O pins.

ARM Cortex-M0+ -based MCU with 64KB Flash, 8KB SRAM, 48 MHz, four 16-bit timer/counters and two 24-bit Timer/Counters, DMA, 5 SERCOMs, 14-channel 12-bit ADC, 10-bit DAC, four ACs, 32 pins. It is optimized for lighting, motor control and other control applications

ARM Cortex-M0+ based MCU with 64KB Flash, 8KB SRAM, 48 MHz, six 16-bit timer/counters and two 24-bit Timer/Counters, DMA, 5 SERCOMs, 18-channel 12-bit ADC, 10-bit DAC, four ACs, 48 pins. It is optimized for lighting, motor control and other control applications

ARM® Cortex®-M0+ -based microcontroller (MCU) with 32KB Flash, 4KB SRAM, 48 MHz, four 16-bit timer/counters and two 24-bit Timer/Counters, DMA, 5 SERCOMs, 14-channel 12-bit ADC, 10-bit DAC, four ACs, 32 pins. It is optimized for lighting, motor control and other control applications

1Kb I²C-compatible 2-wire Serial EEPROM with Software Write Protection and a Pre-programmed Serial Number

2Kb I²C-compatible 2-wire Serial EEPROM with Software Write Protection and a Pre-programmed Serial Number

4Kb I²C-compatible 2-wire Serial EEPROM with Software Write Protection and a Pre-programmed Serial Number