Datasheets

ARM926EJ-S Technical Reference Manual

ARM926EJ-S Technical Reference Manual Complete
( file size: 1702424 , 248 pages , updated: 01/2004 )

SAM9G15

SAM9G15 Complete
( file size: 5.5MB , 1215 pages , revision F , updated: 03/2014 )

More Documents...

With an ARM926 core and running at 400 MHz, the SAM9G15 integrates a graphics LCD controller with 4-layer overlay offering picture-in-picture, alpha-blending, scaling, rotation and color conversion, and a 10-bit ADC that supports 4/5-wire resistive touchscreen panels. Multiple communication interfaces include a soft modem supporting exclusively the Conexant SmartDAA line driver, HS USB Host and Device and FS USB Host with on-chip transceivers, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S and TWIs. A multi-layer bus matrix is coupled with multiple DMA channels. The External Bus Interface incorporates controllers offering support for 8-bank DDR2 and for LPDDR, SDRAM/LPSDRAM, static memories, as well as specific circuitry for MLC/SLC NAND Flash with integrated ECC up to 24 bits. The SAM9G15 is available in a 217-ball BGA package with 0.8mm ball pitch.

Key Parameters

Parameter
Value

Flash (Kbytes):

0 Kbytes

Pin Count:

217

Max. Operating Freq. (MHz):

400 MHz

CPU:

ARM926

Hardware QTouch Acquisition:

No

Max I/O Pins:

105

Ext Interrupts:

105

USB Transceiver:

3

USB Speed:

Hi-Speed

USB Interface:

Host, Device

 

Ordering Codes

Ordering Code Package Speed Power Supply Operational Range Comment Buy Online Samples
AT91SAM9G15-CU LFBGA217_J 400 I/Os: 1.8-3.3V / Core: 1.0V typ Industrial (A) (-40°C to 85°C) Buy Request
AT91SAM9G15-CU-999 LFBGA217_J 400 I/Os: 1.8-3.3V / Core: 1.0V typ Industrial (A) (-40°C to 85°C) Tape&Reel Buy Request