AT89C51RC2
-
|
| |
| PDF |
Software |
Description |
|
|
C Flash Drivers for the (A)T89C51RB2/RC2/IC2 for Keil Compiler rev 1.2.1
(11 pages, updated 12/01) |
|
|
External Brown-out Protection for C51 Microcontrollers with Active High Reset Input
(15 pages, updated 11/02)
This Application Note shows in detail how to prevent system malfunction during periods of insufficient power supply voltage. |
|
|
How to Emulate Read/Write Code Access to Atmel T89C51xx Using Hitex DProbeHS Emulator
(13 pages, updated 05/02) |
|
|
In-system Programming with C51 MCU and External Flash
(24 pages, updated 01/00) |
|
|
Programming T89C51xx and AT89C51xx with Device Programmers
(13 pages, revision D, updated 06/05) |
| Top |
| Design Considerations |
| PDF |
Software |
Description |
|
|
AVR186: Best practices for the PCB layout of Oscillators
(4 pages, revision A, updated 3/08)
This application note provides guidelines to design the PCB layout in order not to risk failure and unstable oscillator operation. |
| Top |
| General Purpose |
| PDF |
Software |
Description |
|
|
C51 General Information about Bootloader and In-System Programming
(5 pages, revision A, updated 03/07)
This document describes the Atmel Bootloaders for 8051 family processors. |
|
|
EMC Improvement Guidelines
(17 pages, updated 8/03) |
|
|
How to Calculate the Capacitor of the Reset Input of a C51 Microcontroller
(8 pages, updated 10/03)
This Application Note explains how the reset of the 80C51 microcontroller works when the RST pin is a pure input pin and when the RST input is bi-directional. It gives rules
to determine the extra components required to operate the reset function properly. |
| Top |
|
|
| |
|
Touch Solutions
