| Products > > MCU Wireless > Tool Card |
| ATAVRRZ541 AVR Z-Link 2.4 GHz Packet Sniffer Kit | ||||||||||
| ||||||||||
| : | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
AVR2001: AT86RF230 Software Programmer's Guide
(Application Note, 62 pages, revision A, updated 7/07)
This document goes into greater depth than the datasheet when it comes to correct configuration and usage of the features that the radio transceiver provides. |
|||||||||
|
AVR2004: LC-Balun for AT86RF230
(Application Note, 15 pages, revision A, updated 4/08)
In some cases the used balun on the ATAVR®RZ502 Radio Boards must be replaced by concentrated elements. Therefore the functionality must be given by the use of capacitors and inductors only. This application note shows how to transform the differential AT86RF230 RF signal into a single-ended 50 ohm antenna without using the original balun. |
|||||||||
|
|
AVR2005: Design Considerations for the AT86RF230
(Application Note, 9 pages, revision A, updated 8/07)
The ATAVRRZ502 is designed for evaluation of the Atmel AT86RF230 2.4 GHz radio transceiver. This application note describes the design and layout of the so-called “Radio Extender Board” (REB) that are provided with the ATAVRRZ502. |
|||||||||
|
|
AVR2006: Design and characterization of the Radio Controller Boards 2.4GHz PCB Antenna
(Application Note, 9 pages, revision A, updated 8/07)
This application note describes the PCB antenna used on the Radio Controller Board as a part of the ATAVRRZ200. This kit is designed for the evaluation of the Atmel® AT86RF230 2.45 GHz radio transceiver. |
|||||||||
|
|
AVR2007: IEEE802.15.4 MAC power consumptions for AT86RF230 and ATmega1281
(Application Note, 14 pages, revision A, updated 9/07)
This Application Note describes two ways of estimating the current consumption of the AT86RF230 radio and the ATmega1281 microcontroller as a transceiver system for the IEEE802.15.4™ standard. |
|||||||||
|
|
AVR2009: AT86RF230 – Software Programming Model
(Application Note, 4 pages, revision B, updated 5/08)
The AT86RF230 Software Programming Model (SWPM) provides a reference for developers utilizing the AT86RF230 radio transceiver as effective as possible. |
|||||||||
|
|
AVR2014: AT86RF230 Receiver sensitivity measurements
(Application Note, 14 pages, revision A, updated 4/08)
The Atmel AT86RF230 radio transceiver has a specified receiver sensitivity of -101 dBm. The following document shall provide the information that is required for measuring this value with available Hard- and Software. |
|||||||||
|
|
AVR2022: AT86RF231 - Software Programming Model
(Application Note, 5 pages, revision A, updated 5/08)
The AT86RF231 Software Programming Model (SWPM) provides a reference for developers utilizing the AT86RF231 radio transceiver as effective as possible. |
|||||||||
|
|
AVR2028: AT86RF212 – Software Programming Model
(Application Note, 5 pages, revision A, updated 8/09)
The AT86RF212 Software Programming Model (SWPM) shall provide a reference for developers utilizing the radio transceiver AT86RF212 as effective as possible. |
|||||||||
|
|
Daintree Networks SNA Getting Started Guide
(User Guide, 38 pages, revision 08/07, updated 08/07)
|
|||||||||
|
|
IEEE 802.15.4 MAC
(User Guide, 35 pages, revision A, updated 09/06)
This user guide describes the interface between the application/network and the MAC layer as implemented by Atmel's IEEE 802.15.4 compliant firmware. See Software section to download the package. |
|||||||||
| Software: | ||||||||||
|
AVR2025: IEEE 802.15.4 MAC Software Package for AVR Z-Link
(16 MB, revision 2.3.1, updated 9/09) |
|||||||||
| : | ||||||||||
| AT86RF230 ATmega1280 ATmega1281 ATmega128RZAV ATmega128RZBV ATmega2560 ATmega2561 ATmega256RZAV ATmega256RZBV ATmega644 ATmega64RZAPV ATmega64RZAV | ||||||||||
