はじめに

ここでは、本製品の評価および作業を開始するために理解する必要がある内容のすべてをご紹介しています。




Datasheet

PDF

ソフトウェア

説明

ATM90E25

ATM90E25 Preliminary

(ファイルサイズ: 541 KB, 57 ページ, 改訂 1.2, 更新日: 05/2014)

Single-Phase, High-Performance, Wide-Span Energy Metering IC

その他のドキュメント...

The ATM90E25 is a high-performance energy metering device for single-phase two-wire, single-phase three-wire or anti-tampering energy meters. With the measurement function, the ATM90E25 can also be used in power instruments which need to measure voltage, current, etc.

  • Fully compliant with IEC standard IEC62052-11 and IEC62053-21
  • Applicable to class 1 or class 2 single-phase watt-hour meter
  • Accuracy of 0.1% for active energy and 0.2% for reactive energy over a dynamic range of 5000:1
  • Temperature coefficient is 15ppm/°C (typical) for on-chip reference voltage
  • Electrical parameters measurement: less than ±0.5% fiducial error for Vrms, Irms, mean active/apparent power, frequency, power factor and phase angle
  • Standard 4-wire/simplified 3-wire SPI interface
  • Dedicated ADC and different gains for L line and N line current sampling circuits
  • Current sampled over shunt resistor or Current Transformer (CT)
  • Voltage sampled over resistor divider network or Potential Transformer (PT)
  • Programmable L line and/or N line metering modes
    • Anti-tampering mode (larger power)
    • L line mode (fixed L line)
    • L+N mode (applicable for single-phase three-wire system)
    • Flexible mode (configure through register)
  • Voltage channel (when gain is '1'): 120µVrms~600mVrms
  • L line current channel (when gain is '24'): 5µVrms~25mVrms
  • N line current channel (when gain is '1'): 120µVrms~600mVrms

主なパラメータ

パラメータ

Meter Type:

Single-Phase

Dynamic Range:

5000:1

Temp Coefficient Type (ppm/degC):

15 (ppm/degC)

Active Energy Accy (%):

0.1 %

Temp. Range (deg C):

-40 to 85