Search Results:
Search
  • Results
Showing 1 - 1000 of about 5310 results.

The RF6505RC128A-410  demo  board  is  a  reference  design  partnership  between RFMD's RF6505 Front End Module and Atmel Corporation's ATmega128RFA1/256RFR2 SoC. This presents a complete 2.4GHz ZigB...
2014-02-11

(2.2MB)

AVR040: EMC Design Considerations
(Revision E, 22 pages)

This application note covers the most common EMC problems designers encounter when using microcontrollers.
2016-11-01

(284KB)
(Software package added. File size: 717KB, updated: 09/2015.)The AT86RF231 diversity board demonstrates the capabilities of the 802.15.4 compliant 2.4 GHz radio transceiver AT86RF231. With the high ...
2015-09-07

(284604)

... must be considered while designing the application ... band applications are designed on small ... PCB Antenna Reference Design [APPLICATION NOTE ...

... require additional voltage level conversion in the design. ... suitable for OEM integration into custom designs. The SIM900 is designed to be powered ...
The Peripheral Touch Controller (PTC) is a hardware module providing high touch performance while achieving best-in class noise immunity, moisture tolerance and faster response time. This document des...
2016-05-09

(2.08MB)
This application note has been written to provide answers to some of the questions and problems faced when starting designs involving Atmel® AVR® microcontrollers.
2016-09-08

(685KB)
The purpose of this document is to introduce various low power modes of the SAM4L family and demonstrate how to do low power design with FreeRTOS tick suppression feature on SAM4L device.
2013-10-15

(1.6MB)

... For most engineers, EMC design is a relatively ... existing product, which perhaps was designed without any ... When designing a new product, it is very ...
This document describes three full applications using Logic Doubling techniques:8255 Serial IO expander with IO enable on every pinLow Power Serial IO expander and 32 LED driverFour 8-bit PWM generato...
2001-01-01

(1660301)

... Atmel AT01244: DALI Slave Reference Design Atmel 8-bit Microcontrollers ... Atmel AT01244: DALI Slave Reference Design [APPLICATION NOTE] ...
This application note gives an overview of available features on the UC3 A and B series that help decrease power consumption. Most sections of this application note are also applicable for other 32-bi...
2008-05-01

(459043)

This application note provides guidelines to design capacitive touch long slider sensors with PTC. It covers the design rules for both one-layer and two-layer sensors. PCB layout technique to reduce d...
2015-06-23

(561KB)

... allow the easy creation of industrial interface designs. ... declarative language used for designing interfaces. ... lets you quickly design complex user ...

... the complexity of designing the guard ... it must be carefully designed to avoid ... 42360C-PTC-Robustness-Design-Guide_AT09363_Application Note ...
This application note describes how to implement a Joystick Game Controller using our ATMEL XMEGA devices. This reference design uses the XMEGA device’s on board ADC to sample joystick movement and in...
2013-01-24

(1771KB)

The design guide describes the rules that can be used to create sensor patterns on PCBs or other conductive material, such as Indium Tin Oxide (ITO).
2011-11-01

(1058709)
This application note describes the details of a Low Power touch sensor supported by the PTC. It provides an idea to application designers about different sensor configurations to use the Low Power Se...
2015-04-28

(1.1MB)

... must be considered while designing the application ... band applications are designed on small ... PCB Antenna Reference Design [APPLICATION NOTE ...

... SAM4L is designed specifically for use in applications that require extremely ... family and demonstrate how to do low power design with FreeRTOS ...
The aim of this document is to help customers to avoid errors that are frequently done in order save efforts and time during hardware debugging sessions. This document relates only to Atmel's 8051 sta...
2007-11-01

(245406)

... second generation Atmel device fitters are designed to take ... is easy to include in the design flow. ... Atmel has placed these reference designs on it's ...
This application note mainly describes the low power design considerations of Thermostat with Touch and Wireless Connectivity
2014-03-21

(653KB)
This Application Note provides guidelines for designing with Atmel PLDs and answers many frequently asked questions.
2000-09-01

... more information on power calculations and designing with “Z ... that a PLD will operate as designed, it is ... board layout and the logic design can affect ...

... design Features ... Include the power manager driver in you software design and enter a sleep mode with: SLEEP(AVR32_PM_SMODE_IDLE); ...
... allow the easy creation of industrial interface designs. ... declarative language used for designing interfaces. ... lets you quickly design complex user ...
2013-06-07

(933KB)

The ATAVRRZ502 is designed for evaluation of the Atmel AT86RF230 2.4 GHz radio transceiver. This application note describes the design and layout of the so-called "Radio Extender Board" (REB) that are...
2007-08-01

(311401)

... method is suitable for designing small sliders ... Sliders designed based on the above calculation ... depends on the sensor design, ground shielding ...

... The new ATA6642 LIN SiP is designed for complete LIN-bus node applications, in particular for LIN switch applications. ... the Design of Switch ...
This application note is a guide to assist users in migrating QTouch designs from Atmel® | SMART SAM D MCUs to Atmel SAM C MCUs. This document mainly covers the enhanced features of PTC peripheral in ...
2016-01-22

(1MB)

... Design Recommendations ... To ensure full USB device compliance, however, there are some issues to consider while designing the hardware ...
... Designing ... Originally key fobs were designed for only one purpose: to unlock the ... During design, the LC tank must be carefully selected for optimum ...
2010-10-01

(1,097 KB)
... The new ATA6642 LIN SiP is designed for complete LIN-bus node applications, in particular for LIN switch applications. ... the Design of Switch ...
2012-10-01

(481 KB)
SAMB11 Hardware Design Guide.
2016-01-04

(1.3MB)

... common for all sensors available in QTouch design. ... Atmel-42655A-Migrating- QTouch-Designs-from-SAMD ... Atmel products are not designed for and ...

... Designing ... Originally key fobs were designed for only one purpose: to unlock the ... During design, the LC tank must be carefully selected for optimum ...
This document introduces a set of recommendations that cover the following technical topics: USB 2.0 full speed and low speed electrical complianceEFTB (electrical fast transient burst)Global EMC pe...
2012-07-11

(326KB)

... When designing a decorated front panel, be aware ... X and Y electrodes are designed to optimize ... Buttons, Sliders and Wheels Sensor Design Guide ...

... the PCB pad that the antenna is connected to is properly designed for 50Ω ... ground reference for the antenna pad, make sure the pad design has a ...
... By selecting system components designed for extremely ... on mechanical and electrical system design and how ... Key fob designs can be realized with ...
2010-10-01

(1,400 KB)
... Highly integrated and advanced radio designs available today enable the engineer to design RF systems with greater levels of performance than ...
2012-10-01

(330 KB)

... Page 7. Atmel AT04204: Design a Buck Converter with XMEGA E [APPLICATION NOTE] ... The designer needs to handle and balance it in their ...

... By selecting system components designed for extremely ... on mechanical and electrical system design and how ... Key fob designs can be realized with ...

... The SAM4L MCU is designed from the ... level firmware and hardware designs in the ... AT07146: Low Power Design Consideration in Thermostat with ...

... Highly integrated and advanced radio designs available today enable the engineer to design RF systems with greater levels of performance than ...
The application note will introduce the working principle of the Buck converter, and give a guide on how to design a Buck converter with XMEGA E device in both hardware and firmware aspects.
2013-09-16

(776KB)
The RF6555_ATmega_256_Reference board is  a  reference  design  partnership  between RFMD's RF6555 Front End Module and Atmel Corporation's ATmega128RFA1/256RFR2 SoC. This presents a complete 2.4GHz Z...
2014-04-08

(1.7MB)

The RFSM6575RC128A-410 demo  board  is  a  reference  design  partnership  between RFMD's RF6575 Front End Module and Atmel Corporation's ATmega128RFA1/256RFR2 SoC. This presents a complete 2.4GHz ...
2014-04-08

(2.4MB)

This hands-on will demonstrate the ease of use of the different Atmel QTouch technology tools which are used to develop and tune capacitive buttons, sliders and wheels designs, providing within Atmel ...
2016-03-30

(6.7MB)

... For more information about designing the touch ... 42271D-Introduction-to-QTouch- Design-Parameters-using ... Atmel products are not designed for and ...
This application shows DALI slave LED module function that compliant with standard IEC62386. Stack is in common->services folder, drivers in mega->drivers, and others are application. The ...
2013-07-08

(490KB)

This document describes the guidelines to develop touch designs for the Atmel QTouch Surface solution. The design guide is an excellent starting point that provides useful guidelines to help in initia...
2015-04-24

(1.2MB)
Reference Design (EU + US) for ATA8520-EK4/EK6-E (EU, 868MHz) and ATA8520-EK1/EK3-F (US, 902MHz)
2016-07-01

(1,810 KB)

... the actuator location and design the actuator ... PCB-mounted actuator designs like the Sanyo NRS ... reflow-solderable and are designed for surface ...

QTAN0085: Haptics Design Guide
(Revision B, 10 pages)

This application note describes the general process and design decisions required to develop a small system device that incorporates haptic tactile feedback. It provides several examples to illustrate...
2013-02-15

(174KB)


... parameters relevant for designing applications where ... AVR042: AVR Hardware Design Considerations [APPLICATION ... are not designed for and will ...
This Application note shows a user the process of converting a design from a discontinued Xilinx CoolRunner Family (formerly Philips) to the equivalent Atmel AT15xx family CPLD
2001-10-01
... F201-2*10RGF-W2-NF J100 [DESIGN NOTE] The ATSHA204 is powered through an IO Pin from the EDBG on an MCU board. ...
2016-02-18

(3.7MB)
This application note provides the Altium Designer schematic symbol and PCB footprint libraries for the Atmel® 802.15.4 MCUs IEEE® 802.15.4 transceivers. The provided library files will enable designe...
2011-11-01

(83645)

Designing With CryptoAuthentication™ ... board (see Figure 13) which is designed to allow ... This low-cost compact USB dongle design combines the ...
2009-05-01

(532096)
... U100 ATSHA204A-MAHCZ-T [DESIGN NOTE] The ATSHA204 is powered through an IO Pin from the EDBG on an MCU board. ...
2016-02-19

(3.7MB)

PLD Design Software Overview
(Revision B, 4 pages)

An overview of the design software tools for Atmel SPLDs and CPLDs.
2013-12-09

(92KB)

... Converting Xilinx ® CoolRunner ™ Designs to ... can also translate their ABEL Design to CUPL ... Atmel- WinCUPL™ or Atmel ProChip™ Designer Tool ...

ULC Design Checklist
(Revision N, 4 pages)

... number of gates in the design (combinational and FFs, not RAM): Approx. ... 3. Initialization Information Yes No Yes No ULC Design Checklist ...
2005-06-01

(121776)

... certifications of the reference designs will help ... Atmel ATA8520E Reference Design [APPLICATION NOTE] Atmel ... products are not designed for and ...

... Altium Designer already provides many integrated libraries for Atmel devices. ... by supplying these libraries, we hope to enable design engineers to ...

... The Atmel WinCUPL supports CUPL designs for all ... Rev.: Atmel-3629B-PLD- Design-Software-Overview_122013 ... products are not designed for and ...

... AVR2005: Design Considerations for the ... The ATAVRRZ502 is designed for evaluation of the Atmel AT86RF230 2.4 GHz radio transceiver. ...
HDLPlanner solves the addition design cycle problem by providing an environment for creating technology independent HDL designs, which guaranteed to product performance delivering layouts.
1999-10-01

... [DESIGN NOTE] The rubber feet are optional and can be removed. ... [DESIGN NOTE] IMPORTANT NOTICE: Connectors are not mounted in the PCB ...
... [DESIGN NOTE] The rubber feet are optional and can be removed. ... [DESIGN NOTE] IMPORTANT NOTICE: Connectors are not mounted in the PCB ...
2014-06-20

(4.5MB)

ATZB-A-233-XPRO Design Documentation
(Revision A, 13 pages)

... J100 [DESIGN NOTE] IMPORTANT NOTICE: UART_RX and UART_TX refer to RX (input) and TX (output) at the target device side. ...
2013-11-05

(5.0MB)

... J100 [DESIGN NOTE] IMPORTANT NOTICE: UART_RX and UART_TX refer to RX (input) and TX (output) at the target device side. ...
... J100 [DESIGN NOTE] IMPORTANT NOTICE: UART_RX and UART_TX refer to RX (input) and TX (output) at the target device side. ...
2013-11-05

(5.0MB)

... J100 [DESIGN NOTE] IMPORTANT NOTICE: UART_RX and UART_TX refer to RX (input) and TX (output) at the target device side. ...

ATAN0144: ATA8520D Reference Design
(Revision A, 20 pages)

... The MCU and sensor-related blocks are designed as specified in their datasheet ... frequency is ~8MHz, which is not critical for the design and layout. ...
2015-11-01

(1,395 KB)
... instead reviewing his design, the designer finds that ... For a design with a single clock, STA ... With asynchronous designs, it's much more complicated ...
2006-03-01

(56600)

... Atmel AT14973: Wearable Demo Reference Design [USER GUIDE] Atmel ... APPLICATIONS DISCLAIMER: Atmel products are not designed for and ...

ATZB-X-233-XPRO Design Documentation
(Revision A, 14 pages)

... J100 [DESIGN NOTE] IMPORTANT NOTICE: UART_RX and UART_TX refer to RX (input) and TX (output) at the target device side. ...
2013-11-05

(4.2MB)

... The MCU and sensor-related blocks are designed as specified in their datasheet ... frequency is ~8MHz, which is not critical for the design and layout. ...

NOT RECOMMENDED FOR NEW DESIGNS ... contains a 4-layer design on standard ... It can be designed on a 2-layer board [4]. The top and bottom ...
This application note describes the common connectors for the Atmel AVR Xplained MCU boards, which have been designated for use with sensor top modular expansion boards. The specification serves as a ...
2011-07-01

(389827)

... J100 [DESIGN NOTE] IMPORTANT NOTICE: UART_RX and UART_TX refer to RX (input) and TX (output) at the target device side. ...

... TECHNOLOGY INDEPENDENT DESIGN ENTRY: Designs created in HDLPlanner are completely technology independent, conform to vendor laid ...

... number of gates in the design (combinational and FFs, not RAM): Approx. ... 3. Initialization Information Yes No Yes No ULC Design Checklist ...

... need to be made while designing a PCB ... parameters available for configuring a QTouch Surface design. ... The library is designed to save power by ...

... optional and can be taken as needed in derivative designs. ... 3 Printed Circuit Board Design ... The board was designed as an example for RF layout ...

ATREB233-XPRO Design Documentation
(Revision A, 16 pages)

... FCC ID LABEL1 [DESIGN NOTE] The ATSHA204 is powered through an IO Pin from the EDBG on an MCU board. R100 is ...
2013-11-05

(2.6MB)
This Application Note details how to write nonvolatile memories during in-circuit testing operations.
1997-12-01

... FCC ID LABEL1 [DESIGN NOTE] The ATSHA204 is powered through an IO Pin from the EDBG on an MCU board. R100 is ...

... instead reviewing his design, the designer finds that ... For a design with a single clock, STA ... With asynchronous designs, it's much more complicated ...

ATZB-X-233-USB Design Documentation
(Revision A, 11 pages)

2013-11-05

(2.0MB)

Designing With CryptoAuthentication™ ... board (see Figure 13) which is designed to allow ... This low-cost compact USB dongle design combines the ...

ATZB-RF-233-1-C Design Documentation
(Revision A, 12 pages)

2013-11-22

(7.2MB)
2014-06-20

(5.8MB)
2013-11-07

(6.7MB)
2014-06-20

(6.2MB)
2014-06-20

(7.5MB)

... Designing Boards with Atmel AT89C51 ... Alternatively you may design a 500 Ω resistor in series ... or subsystems on the board are designed to respond ...







... Application Circuit The Atmel® ATA5795 was designed for low ... The reference design is shown in Appendix A ... 15 be used in the reader coil designs. ...
2015-05-01

(1,027 KB)

... optional and can be taken as needed in derivative designs. ... 3 Printed Circuit Board Design ... The board was designed as an example for RF layout ...
The SAM L21 Wearable Demo Reference Design (Ordering code: ATULPC-DEMO) incorporates Atmel SAM L21 microcontroller and ATBTLC1000 fully certified module with sensors to demonstrate a complete solution...
2016-08-08

(2.61MB)

... Radiation pattern • Impedance measurements • WIPL design files • NEC ... This kit is designed for the evaluation of the Atmel® AT86RF230 2.45 GHz ...
This application note introduces the use of U-Boot (Univeral Boot Loader) as the first step in starting Linux, and describes how to modify the U-Boot to adapt a custom board based on Atmel SAMA5D3/D4 ...
2014-12-05

(89 KB)

... Application Circuit The Atmel® ATA5795 was designed for low ... The reference design is shown in Appendix A ... 15 be used in the reader coil designs. ...

... the details of designing a Low ... PTC) has been designed to perform ... Low-Power-Sensor-Design-with-PTC_ApplicationNote_AT12405_042015 ...

... Design Notes ... The specification serves as a guideline for designing the expansion boards ... The boards should be designed to bridge the two headers ...
The zip file contains all the schematics, PCB and BOM files.
2016-03-16

(10.9 MB)

... Rev.: Atmel-11243A-ATARM-U-Boot-Design-for-SAMA5D3 ... AUTOMOTIVE APPLICATIONS DISCLAIMER: Atmel products are not designed for and ...

... the PCB pad that the antenna is connected to is properly designed for 50Ω ... ground reference for the antenna pad, make sure the pad design has a ...


... 410 is made using a 4-layer design on standard FR4 material (IS400) with a total thickness of 66mils. It can be designed on a two-layer board [6 ...
This document details the hardware design guidelines for a customer to design the ATWILC3000 IC onto their board.
2015-10-09

(724KB)

... the PCB pad that the antenna is connected to is properly designed for 50Ω ... ground reference for the antenna pad, make sure the pad design has a ...

... It can be designed on a two layer board [4 ... suppress radiated harmonics from the reference design but is ... this trace for single-ended designing or to ...
This document details the hardware design guidelines for a customer to design the Atmel ATBTLC1000 IC onto their board.
2015-10-02

(1MB)

... Design 8-/16-bit Atmel Microcontrollers Features ... Page 2. Atmel AT01095: Joystick Game Controller Reference Design [APPLICATION NOTE] ...
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and test files for all the kit versions.
2013-03-15

(5KB/161MB)
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and test files for all the kit versions.
2013-03-15

(5KB/161MB)
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and test files for all the kit versions.
2013-03-15

(5KB/161MB)
... Designing a Data Logger for a Slow Cooker ... Design Limitation The circuit has a design limitation. ... Note that the controller was designed with two ...
2004-06-01

(463327)

... users are encouraged to convert their designs to CUPL and use Atmel Design software tools such as Atmel-WinCUPL™ or ProChip Designer™. ...
This Application note will assist users in converting ABEL (.abl) source files into CUPL (.pld) source files.
2002-08-01

(105234)

... issues that will be faced when designing a battery ... The reference design uses a 5mΩ resistor for ... The Protocol is designed to handle multiple master ...
This application note provides techniques to optimize the design of an Atmel | SMART SAMA5D3-based system in order to achieve the lowest power consumption possible.
2014-06-23

(538 KB)
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and test files for all the kit versions.
2013-03-15

(4KB/161MB)
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and test files.
2016-06-24

(1.72 KB / 7.85 MB)
This application note discusses on factors that account for power consumption and provides guidelines to reach lowest possible power consumption in Atmel® QTouch® designs without compromising touch fu...
2012-12-04

(279KB)

... Designing a Data Logger for a Slow Cooker ... Design Limitation The circuit has a design limitation. ... Note that the controller was designed with two ...

... U100 ATSHA204A-MAHCZ-T [DESIGN NOTE] The ATSHA204 is powered through an IO Pin from the EDBG on an MCU board. ...

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and test files for all the kit versions.
2014-09-30

(1.72 KB / 12.6 MB)
... For example, a 3 x 3 matrix can handle up to nine Switch Matrix Module Design Using LIN SiPs ATA6612/13 Markus Schmid Standard Products ...
2009-10-01

(662500)
An overview of ProChip Designer Software suite including its features, contents, licensing terms and design flow.
2016-05-18

(303KB)

... Low-Power-Design-for-SAMA5D3-based-Systems-Application-Note_23-Jun- 14 2.5 LCD Controller (LCDC) This scenario is designed to evaluate ...

AT40KEL-DK Design Kit Content
(Revision E, 5 pages)

... Both design kits contain: • A prototyping mother board which is populated with a commercial serial ... Atmel FPSLIC® System Designer CD-ROM, of ...
2007-05-01

(1217760)

... note 1) - PDF printouts of these schematics PCBA archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... Power Optimization feature in noiseless QTouch designs where power ... 4. Sensor Design Touch sensor electrodes should be designed optimally to ...
Atmel SmartConnect-WILC1000 is an IEEE 802.11 b/g/n IOT link controller SoC. This document details the hardware design guidelines for a customer to design the Atmel ATWILC1000 IC onto their board.
2015-09-29

(500KB)

... the PCB pad that the antenna is connected to is properly designed for 50Ω ... ground reference for the antenna pad, make sure the pad design has a ...
This document details the hardware design guidelines for a customer to design the Atmel ATWILC1000 IC onto their board.
2015-03-27

(1MB)

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... the PCB pad that the antenna is connected to is properly designed for 50Ω ... ground reference for the antenna pad, make sure the pad design has a ...

... issues that will be faced when designing a battery ... The reference design uses a 5mΩ resistor for ... The Protocol is designed to handle multiple master ...
... for touch controls, especially those designs where the ... This application note is designed to give you a ... start in making a successful design with a ...
2005-10-01

(433919)

... For example, a 3 x 3 matrix can handle up to nine Switch Matrix Module Design Using LIN SiPs ATA6612/13 Markus Schmid Standard Products ...

... Designer v5.0.1 for schematic and CUPL designs. ... ATF15xxBE is not recommended for new design. ... Atmel products are not designed for and will ...
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and test files for all the kit versions.
2014-10-10

(1.93 KB / 170 MB)
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and test files for all the kit versions.
2014-08-08

(2.56 KB / 232 MB)
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and test files.
2015-01-13

(2 KB / 118 MB)

... AVR188: Design Guidelines for ATtiny43U ... Table 2-1 below presents component values for a design that has been optimized for high performance. ...

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... F201-2*10RGF-W2-NF J100 [DESIGN NOTE] The ATSHA204 is powered through an IO Pin from the EDBG on an MCU board. ...

... note 1) - PDF printouts of these schematics PCBA archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... note 1) - PDF printouts of these schematics PCBA archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... note 1) - PDF printouts of these schematics PCBA archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... system design considerations for designs utilizing the ... Atmel-8882A-TPM-System- Design-Mftg-Recommendations ... products are not designed for and ...
2015-11-01

(5,037 KB)

... Both design kits contain: • A prototyping mother board which is populated with a commercial serial ... Atmel FPSLIC® System Designer CD-ROM, of ...

QTAN0087: Proximity Design Guide
(Revision B, 18 pages)

This application note walks you through design recommendations associated with QTouch Proximity Sensing.
2012-04-10

(809354)


ATSAMG55-XPRO Design Documentation
(Revision 2, 17 pages)

2014-10-31

(5.47MB)
... system design considerations for designs utilizing the ... Atmel-8882A-TPM-System- Design-Mftg-Recommendations ... products are not designed for and ...
2014-01-15

(214KB)
This document details the hardware design guidelines for a customer to design the Atmel SAMW25-MR210/510PA module onto their board.
2015-04-09

(871KB)

... Rev.: Atmel-42436A-SAMW25-MR210510PA-HW-Design-Guide-IEEE802 ... APPLICATIONS DISCLAIMER: Atmel products are not designed for and ...

... Design files bundle contents information ----- ... SCH_PCB directory: - contains all Altium EDA design source files.
Atmel SmartConnect-WINC1500B is an IEEE 802.11 b/g/n IOT Network controller SoC. This document details the hardware design guidelines for a customer to design the Atmel ATWINC1500B IC onto their board...
2015-09-30

(635KB)
This user guide describes Atmel ATWINC3400 software design and API referance for programmers.
2016-04-29

(7.3MB)

... the PCB pad that the antenna is connected to is properly designed for 50Ω ... ground reference for the antenna pad, make sure the pad design has a ...
This document details the hardware design guidelines for a customer to design the ATWINC1500 IC onto their board.
2015-03-26

(707KB)
... The serial Flash is designed to be read sequen ... the processor core in an embedded design are, of ... Many ASIC/controller designs are pad limited in ...
2006-01-01

(250811)
University T-Shirt Design Content

... the PCB pad that the antenna is connected to is properly designed for 50Ω ... ground reference for the antenna pad, make sure the pad design has a ...

... Design Guide User Guide Introduction ... The detailed description of the HIF design is provided in Chapter 16: Host Interface Protocol. ...
... radiation the Atmel® ATA5279C is designed to drive ... Nevertheless, the design of hardware and software has to ... Thus, the designer wants to know in ...
2015-05-01

(1,039 KB)

High Speed USB Design Guidelines ... The material covered can be broken into two main categories: board design guidelines and layout examples. ...
This document provides guidelines for integrating a AT85C51SND3Bx high speed USB device controller onto a 4-layer PCB. The material covered can be broken into two main categories: board design guideli...
2006-06-01

(206454)
... Unless a product was designed with provisions to secure it against this practice ... Shortened design cycles: Pirated designs allow would-be ...
2013-02-19

(188KB)
... The Simple Application Circuit Shown in the RF Design Kit Software ... APPLICATIONS DISCLAIMER: Atmel products are not designed for and will ...
2015-07-01

(748)

... The Simple Application Circuit Shown in the RF Design Kit Software ... APPLICATIONS DISCLAIMER: Atmel products are not designed for and will ...


AT24C02B
(Revision H, 26 pages)

Not Recommended for New Design. Replaced by AT24C01C.
2007-08-01

(686503)

... for touch controls, especially those designs where the ... This application note is designed to give you a ... start in making a successful design with a ...
... We are constantly in search of new Design Consultants with extensive experience designing with Atmel products and are able to conduct their ...
2015-07-20
This document details the hardware design guidelines for a customer to design the ATWINC3400 IC onto their board.
2016-01-25

(869KB)

... the PCB pad that the antenna is connected to is properly designed for 50Ω ... ground reference for the antenna pad, make sure the pad design has a ...
This application note describes the techniques to mitigate the issues caused by moisture in Atmel® QTouch® design. The design techniques are targeted to prevent false detects due to the presence of mo...
2012-07-20

(924KB)
This document briefly describes Atmel's free WinCUPL design tool for SPLDs and CPLDs and gives system requirements. Test
1999-08-01

... It is well suited for small PLD design and verification. The package is specifically designed to support development with Atmel Programmable Logic ...
... Designs ... System Design Challenges ... The system designer also needs to decide how the hardware address will be protected from being altered. ...
2013-02-13

(134KB)

... Designs ... System Design Challenges ... The system designer also needs to decide how the hardware address will be protected from being altered. ...
... example on how to implement large designs on the ... for the pad control of this design, since the ... exactly in an FPGA (without designing specifically for ...
1998-06-01
University Robotics Contest Rules
... Write the actual settings from the RF design kit software ... AUTOMOTIVE APPLICATIONS DISCLAIMER: Atmel products are not designed for and ...
2010-01-01

(424204)
... DAC on AT89C51SND1 Reference Design ... Figure 1: Functional Overview of the Reference Design with DAC in Standard Mode ...
2005-02-01

(94781)

... Write the actual settings from the RF design kit software ... AUTOMOTIVE APPLICATIONS DISCLAIMER: Atmel products are not designed for and ...

... This can be applied to touch sensor designs using an Atmel ... Proximity Design Guide ... are a few items to consider when designing for maximum ...
This document provides guidelines for integrating an 32-bit AVR AT32UC3 A3 series high speed USB device controller onto a 4-layer PCB. The material covered can be broken into two main categories: boar...
2009-04-01

(89219)

... DAC on AT89C51SND1 Reference Design ... Figure 1: Functional Overview of the Reference Design with DAC in Standard Mode ...
... reliability, is driving the next generation of RF IC designs. ... These two devices are also designed for architectural flexibility ... Engineers Greater Design ...
2010-10-01

(612 KB)

ATC18RHA
(Revision G, 16 pages)

... With designs becoming more complex, timing and power ... Therefore, only one design scenario is retained: the ASIC chip is designed by the ...
2011-02-01

(162360)

... USB Design Guidelines ... The material covered can be broken into two main categories: board design guidelines and layout examples. ...
... But the real challenge is designing electronics to operate ... You must have a hardware design that is fast to ... to some part that is designed for twice ...
2014-03-26

(51.4 KB)
... Atmel Can Help with Your Automotive Designs ... To make the task of system design even easier ... recently, our PEPS devices are designed to work with ...
2014-03-26

(251 KB)
Described here are a series of guidelines for designing with AT6000 Series FPGAs.
1999-09-01
... emulator to make my embedded system design expe- rience ... That was when I designed the AT90SMINIPB. ... as all the other items a designer need to ...
2003-06-01

(199544)
... be reused when the design moves to 32 bits. ... ARM-based MCUs are designed to optimize system ... Where designs call for higher processing power ...
2015-04-01

(130 KB)
... Designing Next-Generation Car Access ... Designed for the ISM frequency bands (310-318MHz ... performance help you to design robust automotive RF ...
2013-10-01

(347 KB)

... radiation the Atmel® ATA5279C is designed to drive ... Nevertheless, the design of hardware and software has to ... Thus, the designer wants to know in ...
Atmel's AT40K/AT40KAL and the AT94K FPSLIC include distributed blocks of RAM throughout the device. These blocks are called FreeRAM.
2001-08-01
... that many embedded designs do not have high compute ... at higher temperatures that can be easily overlooked when designing a consumer design. ...
2014-11-11

(526KB)
... advanced breakpoints and Code coverage functionality might reduce the design time significantly. ... Designing for Efficient Production ... Designer's ...
2005-02-01

(233218)

... Figure 4 shows how that same design is converted to implement Atmel RAM. ... For designs where the write signals were active high, an inverter is ...

... Unless a product was designed with provisions to secure it against this practice ... Shortened design cycles: Pirated designs allow would-be ...

AT24C256B
(Revision C, 24 pages)

Not Recommended for New Design. Replaced by AT24C256C. 256Kb, 2-wire Bus Serial EEPROM with full memory Write Protect, supports up to eight devices on single 2-wire bus.
2009-03-01

(712883)

AT25128A/256A
(Revision J, 24 pages)

Not Recommended for New Design. Replaced by AT25128B/256B. 128Kb/256Kb, SPI Bus Serial EEPROM, High Speed, supports Mode 0 and 3 operation.
2007-06-01

(505628)

... Designing a Touch Interface ... So, the design of a high-quality touch sensing system must start ... in painful trade-offs unless the system is designed in a ...

AT25010A/020A/040A
(Revision J, 22 pages)

Not Recommended for New Design. Replaced by AT25010B/020B/040B. 1/2/4Kb, SPI Bus Serial EEPROM, High Speed, supports Mode 0 and 3 operation.
2006-08-01

(532846)
... Designing a Touch Interface ... So, the design of a high-quality touch sensing system must start ... in painful trade-offs unless the system is designed in a ...
2012-01-01

(441 KB)
The AVR Microcontroller and C Compiler Co-Design ... achieve performance approaching 1 MIPS per MHz allowing the system designer to optimize ...
1900-01-01

(69596)

... USA Design, Engineering, Sales and Marketing of Semiconductors ... France Design and industrialization of Semiconductors ...
... Optimized Embedded Designs... defensive mechanisms specifically designed to prevent physical ... The products you design and manufacture today ...
2013-02-19

(188KB)

... ATWINC1500 Wi-Fi Network Controller - Software Design Guide ... Atmel-42420A- WINC1500-Software-Design-Guide_UserGuide_032015 Page 2. ...
Atmel SmartConnect-WINC1500 is an IEEE 802.11 b/g/n IOT network controller SoC. It is the ideal add-On to existing MCU solutions bringing WiFi and Network capabilities through UART or SPI-to-WiFi ...
2015-03-27

(9.2MB)

... Serial EEPROM 2K (256 x 8) AT24C02B Not Recommended for New Design 5126H–SEEPR–8/07 Page 2. 2 5126H–SEEPR–8/07 AT24C02B ...

AT26F004
(Revision D, 38 pages)

Not Recommended for New Design. For new designs use AT25DF041A. 4-Mbit Serial Firmware DataFlash®, SPI Mode 0 and 3 Compatible, Byte Program with Sequential Byte Program Mode, Block Erase (4KB,...
2008-10-01

(722193)

AT26DF161A
(Revision D, 41 pages)

Not Recommended for New Design. For new designs use AT25DF161. 16-Mbit, 70 MHz Serial Firmware DataFlash®, SPI Mode 0 and 3 Compatible, Byte and Page Program, Block Erase (4KB, 32KB and 64KB) a...
2009-08-01

(954762)

AT26DF161
(Revision H, 35 pages)

Not Recommended for New Design. For new designs use AT25DF161. 16-Mbit, 66 MHz Serial Firmware DataFlash®, SPI Mode 0 and 3 Compatible, Byte and Page Program, Block Erase (4KB, 32KB and 64KB) a...
2009-08-01

(708915)

AT26DF321
(Revision E, 35 pages)

Not Recommended for New Design. For new designs use AT25DF321A. 32-Mbit, 66 MHz Serial Firmware DataFlash®, SPI Mode 0 and 3 Compatible, Byte and Page Program, Block Erase (4KB, 32KB, and 64KB)...
2007-10-01

(669059)

AT25DF321
(Revision B, 37 pages)

Not Recommended for New Design. Replaced by AT25DF321A. 32Mb, 70MHz Serial Firmware DataFlash, SPI Mode 0 and 3 Compatible, Byte and Page Program, Block Erase (4KB, 32KB, and 64KB) and Chip Era...
2009-06-01

(752947)
... 1.2.2. “Design Information” Section ... 1.4.3. Starter Kit TEMIC proposes a starter kit for the TSC80251G1D to be evaluated by the designer. ...
1998-10-01
Coin cell operated ePaper Display is an Atmel® ATmega2564RFR2 based reference design specifically designed for applications like medical display devices, electronic security badges, smart tags, electr...
2014-09-11

(1.6MB)

... Electronic Design. But it's only wafer thin: Skinniest keyboard EVER is designed by Camby biz ... Design West or Bust ... Designing with LEDS. ...
... Note: Not available for new designs. Libraries The MG2RT cell library has been designed to take ... Design testability is assured by the full support of ...
2005-06-01

(225424)

MG2RTP
(Revision M, 13 pages)

... Note: 1. Not available for new designs. ... The MG2RTP cell library has been designed to take ... Design testability is assured by the full support of SCAN ...
2006-06-01

(166981)
Kit versioning history and information, plus bundle contents description.
1900-01-01

(1895)

... It is designed to accelerate programming, prototyping and ... This reference design kit provides everything you need ... get a quick start designing a low ...

MH1RT
(Revision K, 20 pages)

... The sheer size of complex designs and the number of ... The glue logic can be designed using full SCAN ... exercise the functionality of the design in its ...
2007-11-01

(238878)

AT40K05/10/20/40AL
(Revision GS, 4 pages)

5K - 50K Gate FPGA with DSP Optimized Core Cell and Distributed FreeRam, Enhanced Performance Improvement and Bi-directional I/Os (3.3 V).
2013-09-27

(119KB)
5K - 50K Gate FPGA with DSP Optimized Core Cell and Distributed FreeRam.
2002-05-01

... These buttons are designed in the form of a ... 2-1. Dimensions of Scroll Sensor Design with Four ... Note: 1. The scroll sensor designs with diameter ...
This application note provides guidelines to design a capacitive touch based scroll sensor. The associated package includes hardware design files and demo firmware supporting tap and scroll detection ...
2016-01-04

(1MB)

Kit versioning history and information, plus bundle contents description.
2012-02-01

(2KB)
Kit versioning history and information, plus bundle contents description.
1900-01-01

(1702)
This reference design demonstrates techniques to use QMatrix touch sensors for 2D position tracking application. ATxmega16D4 device is used in this touchpad design. In the firmware solution provided, ...
2013-11-26

(1.2MB)

Advanced information on ATMX150RHA. ATMX150RHA is a mixed-signal ASIC offer providing high-performance and high-density solutions for space applications.
2016-08-12

(245 KB)
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics and PCB files.
2015-12-11

(1.18 KB)

... Notice: Not recommended in new designs. ... per MHz allowing the system designer to optimize ... EEPROM, and the same design solutions should be ...

Designing a Safer, Cleaner, More Reliable Vehicle. ... Our products are designed in state-of-the-art ... with about 30 years of design experience and ...

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... of all these factors grows, designs and processes ... the fundamental reliability of design rules and ... Wafer Level Test structures are designed to assess ...

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... older versions are not recommended for new designs, and Atmel ... ASF is designed to be used for evaluation, prototyping, design and production ...

... becomes an increasingly important factor in modern day electronics design. ... The most straightforward fan designs simply spin the fan rotor at full ...

... older versions are not recommended for new designs, and Atmel ... ASF is designed to be used for evaluation, prototyping, design and production ...

... Electronic Design. But it's only wafer thin: Skinniest keyboard EVER is designed by Camby biz ... Design West or Bust ... Designing with LEDS. ...

... It also demonstrates how to design a battery ... Lightweight Mesh software stack is designed to work ... not recommended for new designs, and Atmel ...

... DESIGN GUIDELINE] 42137A-LED-12/2013 13 6. Performance Characterization for Four LEDs 10W Solution An MR16 prototype board ...
This application note features a minimalist low-cost RF module design. This design uses a folded dipole antenna and is implemented on a single layer Printed Circuit Board (PCB). This design eliminates...
2013-05-21

(635kB)
Kit versioning history and information, plus bundle contents description.
1900-01-01

(1593)

... It is designed to accelerate programming, prototyping and ... This reference design kit provides everything you need ... get a quick start designing a low ...

Dimmable MR16 Development Kit
(Revision A, 27 pages)

... DESIGN GUIDELINE] 42137A-LED-12/2013 13 6. Performance Characterization for Four LEDs 10W Solution An MR16 prototype board ...
2013-12-25

(4.3MB)
(Software: 39.2MB, revision 3, updated: 05/2016)The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and...
2016-05-09

(2KB)
The text file contains the kit versioning history and information, plus bundle contents description. The zip file contains all the schematics, PCB and test files for all the kit versions.
2012-11-07

(2KB/22MB)

... This design simplifies hardware setup when switching from ... Mesh software stack is designed to work ... not recommended for new designs, and Atmel ...
Kit versioning history and information, plus bundle contents description.
1900-01-01

(1816)
Kit versioning history and information, plus bundle contents description.
1900-01-01

(1699)
Kit versioning history and information, plus bundle contents description.
1900-01-01

(2610)
Kit versioning history and information, plus bundle contents description
2011-07-01

(1758)
PCB Design Considerations when Changing from ... Figure 3-3 shows a suggested compromise pad layout, modified from an existing SOT-23 design. ...
2008-10-01

(92402)
The Thermostat with Touch and Wireless Connectivity is developed to make a low-power thermostat reference design with touch control, and wireless connectivity.
2014-07-15

(1MB)

... older versions are not recommended for new designs, and Atmel ... ASF is designed to be used for evaluation, prototyping, design and production ...
QMatrix Control Panel for In-Home Display is a reference design to demonstrate 7 key touch solution with SPI slave interface on ATtiny4313 device.
2013-09-13

(778KB)

... these predrivers will support successful design of future ... When designing brushed DC motor control systems ... the company has designed the Atmel ...
This application note describes the design details of the In House Unit (IHU) project. The IHU design with CSR Bluetooth Low Energy (BLE) module is a platform to evaluate the integration of the BLE mo...
2013-09-16

(1MB)

This application note introduces methods for preventing radiated emission in the PCB board design of Atmel ARM-based microcontrollers.
2014-01-09

(347 KB)

... of all these factors grows, designs and processes ... the fundamental reliability of design rules and ... Wafer Level Test structures are designed to assess ...

AT88RF1354
(Revision B, 48 pages)

CryptoRF RFID Reader Chip HF 13.56 MHz Type B Specification
2009-03-01

(737593)
This Application Note will act as a guide in converting the programming output file from comparable industry standard CPLDs (.POF file) to the Atmel Programming file (.JED) without any functionality o...
2001-03-01


... special attention is needed in designing the board pad ... is the solder paste stencil design for the ... aperture opening should be designed so maximum ...
2016-04-01

(690KB)

... New products need to be designed fast, before the compe- ... production. FPGAs provide a flexible combi- nation between the quick design cycle and ...
This document illustrates how to configure and use Altium to layout the ATSAMR21 Wireless SoC.
2015-07-27

(1.4MB)

... is a feature rich, extremely low-power 2.4GHz radio transceiver designed for industrial ... In this design, a balun-filter and a chip antenna are also used ...

... older versions are not recommended for new designs, and Atmel ... ASF is designed to be used for evaluation, prototyping, design and production ...

ZigBit 2.4 GHz Wireless Modules
(Revision C, 25 pages)

Balanced RF Output and Dual Chip Antenna
2013-07-11

(959KB)

... with no limitations to manufacture the reference hardware solution for the design. ... Three LEDs, five buttons and one buzzer are designed as human ...

... older versions are not recommended for new designs, and Atmel ... ASF is designed to be used for evaluation, prototyping, design and production ...

... the design rules checker report and decides if modifications or improvements need to be made to the design. The ULC designer also reviews the ...

... Designed to maximize lifetime and energy per cycle, they feature ... SAMA5D3 - Design with Intent. ... very little power, even for high-key-count designs. ...

... Designed to maximize lifetime and energy per cycle, they feature ... SAMA5D3 - Design with Intent. ... very little power, even for high-key-count designs. ...

... MIPS per MHz allowing the system designer to optimize ... The RF front end is designed for low ... large area of this dipole design significantly increases ...

... mechanical components • often require much less space to implement • can provide a better user experience • add design flexibility • have the ...
This application note aims to explain the factors affecting the sensitivity QTouch and QMatrix sensors and ways to optimize the design for sensitivity. It aslo provides step-by-step procedures on how ...
2010-08-01

(426486)
AN0130 documents a hardware solution based on AVR that connects IEEE802.15.4 wireless networks to hard-wired Ethernet LANs and internet cloud services. This supports ZigBee, RF4CE, IEEE 802.15.4 MAC a...
2013-07-11

(4.2MB)

... It also demonstrates how to design a battery ... Lightweight Mesh software stack is designed to work ... not recommended for new designs, and Atmel ...
The application note describes the key design guidelines as a checklist to facilitate review of schematic and PCB layout for Atmel® QTouch® designs.
2014-07-14

(2.5MB)
The kit offers a standard DALI Master features which follow the DALI protocol. It enables the Atmel AVR XMEGA user to get started using XMEGA peripherals right away and understand how to integrate the...
2014-01-17

(1.8MB)

This reference design provides a passive entry door access system for hospitality and residential door access applications. It uses Atmel's PTC based capacitive sensing and ultra-low power Bluetooth S...
2015-11-27

(1.6MB)

This application note describes single-phase electronic energy meter solution with tamper detection logic. The design is low-cost and measures active power, apparent power, power factor, voltage, and ...
2012-11-01

(1.7MB)

ATZB-RF-233-1-C
(Revision C, 20 pages)

... but not limited to, the board design and materials. ... The Antenna in this module is designed to provide ... need to be followed when designing the base ...
2015-08-03

(525KB)

... This design simplifies hardware setup when switching from ... Mesh software stack is designed to work ... not recommended for new designs, and Atmel ...

MSL2021/23/24 LED Drivers Flyer
(Revision A, 2 pages)

... Designing high-performance light fixtures calls for multi ... two-channel LED drivers is designed for CRI ... color LED string, simplifying the design of high ...
2013-02-12

(329 KB)

ICs for Car Access Applications
(Revision H, 8 pages)

... Atmel® has about 30 years of design expertise in automotive products. ... Customers can create their own designs using the low-power Atmel T575xC ...
2013-01-01

(391 KB)

Smart Badge Demonstrator
(Revision C, 2 pages)

... it easy to demonstrate Atmel capabilities for enabling wearable designs thanks to its ... Atmel system technology in a space-constraint design using an ...
2015-09-29

(738KB)

... This method is suitable for designs where usage of an external op ... Sensor Design The sensor for the passive entry system is designed for detecting ...
... Industry-leading development tools and design support let you go to market ... A wide range of starter kits, reference designs, and evaluation kits are ...
2013-01-10

... PCBA archive: - The PCB design file in EDA tool format (note 2) - The board ... note 1: Most of our board schematics are designed with Orcad. ...

Atmel SAM4S Series
(Revision E, 2 pages)

... Get a jump-start on your design with dedicated evaluation kits and software packages. ... Page 2. Design Tools and Ecosystem ...
2016-01-22

(498KB)
This Application Note provides a simple method for modeling the active and static power consumption of a AT6005 design.
1999-09-01
Discusses the design methods and requirements for implementing ISP on ATF15xx CPLDs with ISP support for the ATF1502AS/ASL/ASV, ATF1504AS/ASL/ASV/ASVL, and ATF1508AS/ASL/ASV/ASVL devices.
2015-12-03

... older versions are not recommended for new designs, and Atmel ... ASF is designed to be used for evaluation, prototyping, design and production ...
Balanced RF Output
2009-06-01

(445469)
Atmel's IDS software can convert XNF designs.
2000-07-01
This application note serves as a guide on how to use the I/O Buffer Information Specification (IBIS) models of Atmel | SMART SAMA5D3 embedded MPUs and the external peripherals to perform boarrd-level...
2014-07-31

(2.5 MB)

AT40KEL040 Datasheet
(Revision I, 43 pages)

... The AT40KEL040 is designed to quickly implement high ... large gate count designs through the ... Atmel's design tools provide easy integration with ...
2006-06-01

(777482)
This application note describes an overview of the Certification Scenarios possible when a designer uses the Atmel ZigBits portfolio. It also covers the changes that affect the Atmel existing certific...
2012-11-15

(132KB)

... secondary regulation circuits required in traditional designs. ... inductive step-down converter, designed for driving ... In this reference design, the PWM ...
The reference design of the Real Color ZLL LED Light Bulb is developed to demonstrate ZLL protocol function. The reference hardware includes four parts, AC to DC power supply, Atmel single-chip RF MCU...
2014-02-18

(1.6MB)

... The PCB designer needs to preserve the 100Ω ... plane integrity and slip through Design Rule Checks ... For microstrip designs the copper pour on layer ...
This application note outlines practical RF layout using microstrip to connect wireless micro controllers with baluns and antennas. Unbalanced and Balanced (differential) microstrip techniques are dis...
2013-05-02

(1.5MB)
(Software size: 4.1MB, revision B, updated: 02/2016) Atmel multifunction compact keyboard reference design is a solution for a capacitive touch bluetooth keyboard based on ATSAMD21 and ATBTLC1000. T...
2015-11-27

(1.1MB)

This application note mainly describes the firmware architecture and the application programming interfaces (API) of Thermostat with TOuch and Wireless Connectivity reference design.
2014-01-14

(874KB)

ATF1500ABV
(Revision K, 18 pages)

1500 gate electrically erasable low-voltage (2.7V) CPLD, 44 pins
2005-06-01

(461272)

... plug work-flow which is for JD smart cloud based IoT system designs. ... Warning: Atmel smart plug is designed as a real product reference design. ...
This document focuses on smart plug firmware design based on JD smart cloud, provided by JD, a Chinese retail giant. It explains the smart plug functions, firmware structure, and communication process...
2016-04-15

(841KB)

ATSAMR21B18-MZ210PA
(Revision B, 18 pages)

... suggestions in section 2.2 when designing the base ... Figure 2-3. Base board design for SMT ... DISCLAIMER: Atmel products are not designed for and ...
2015-09-23

(513KB)

... Low Energy (BLE):It is a wireless network technology designed and marketed ... Coplanar Sensor Design: Both X and Y electrodes fabricated on the ...

ATF1502BE
(Revision A, 24 pages)

High Speed low power (1.8V), 32 MC, In-system Programmable
2005-12-01

(525495)
The reference design of DALI Slave based on Atmel® AVR® ATxmega32E5 is developed to demonstrate DALI protocol functions. The reference hardware includes three parts, DALI physical layer interface, MCU...
2013-09-23

(453KB)

... It features a beautiful hardwood body, an advanced ergonomic design, and is fully programmable with the Arduino IDE. ...

... Optional antenna reference designs • IEEE 802.15 ... offer extended functionality designed with developer's ... on end-user design requirements, ZigBit ...
... which seamlessly ties together the tools required to tune the design of touch ... The software tool is designed to enable users without an expert level of ...
2012-07-23

(988KB)
Kit versioning history and information, plus bundle contents description.
2015-08-28

(3 KB)
Kit versioning history and information, plus bundle contents description.
1900-01-01

(2212)
Kit versioning history and information, plus bundle contents description.
1900-01-01

(2638)

... The interface is defined in the file: m2m_hif.h. The detailed description of the HIF design is provided in Chapter 10. Page 7. ...

ATF1500A(L)
(Revision F, 19 pages)

1500 gate electrically erasable CPLD, 44 pins
2005-06-01

(609257)
... to keep with low voltage design trends ... the new generation CryptoMemory devices were designed to be ... The only requirement for designing the new ...
2009-04-01

(225938)

ATWILC1000 SPI Wi-Fi Link Controller
(Revision A, 135 pages)

Atmel SmartConnect ATWILC1000 is an IEEE 802.11b/g/n link controller SoC for applications in the Internet-Of-Things. It is an ideal add-on to existing powerful MCU/MPU solutions bringing Wi-Fi and Eth...
2015-10-09

(3.4MB)

... 1. Procedure ➞ Select “/P: Partition, program and verify from an Atmel file”. 2. Input File ➞ <design>.bst. ... 2. Input File ➞ <design>.bst. ...
Software package: 3.4MB, updated: 04/2016
2015-02-23

(1.8MB)

... The AT40KEL040 is designed to quickly implement high ... large gate count designs through the ... Atmel's design tools provide easy integration with ...
The purpose of this training application note is to get familiar with the Atmel QTouch Composer for developing SAM4L based touch projects.
2013-05-21

(1.5MB)

ATtiny43U - 0.7V tinyAVR
(Revision A, 11 pages)

Optimizing Microcontroller Power Efficiency for Ultra Low Power Designs.
2009-03-01

(214281)
... Dedicated hardware security devices are designed first and foremost with these ... research has shown that with very careful design, testing, and ...
2015-06-20

(279KB)
An overview of all Atmel Power Line Communications Solutions for the Smart Grid
2013-03-22

(3MB)


Product Selection Guide
(Revision 11, 28 pages)

... instructions • 32 working registers • Designed for high ... with fully functional design kits support ... 30 years' experience in designing broadcast radio ...
2016-01-05

(4.55 MB)
In the Application Note we present a reference design of a fully pipelined bit-parallel edge detection circuit that utilizes only pipelined adders and fits into one AT6010 FPGA.
1997-09-01
This application note shows how to achieve the power numbers as shown in the Electrical characteristics section of the SAM D20/D21/D10 data sheet.
2015-01-14

(1.4MB)

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

... note 1) - PDF printouts of these schematics PCB archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Altium. ...
This application note discusses a bootloader specifically designed for devices lacking a separate bootloader section and any hardware communication modules. This design does not require any chip resou...
2013-01-02

(241KB)

ATF1508AS(L)
(Revision P, 31 pages)

128 Macrocell, standard & low power w/ISP
2005-07-01

(706663)

... with no limitations to manufacture the reference hardware solution for the design. ... Atmel SAM-ICE™ is a JTAG emulator designed for Atmel SAMA5 ...

ATF1502ASV
(Revision J, 25 pages)

32 Macrocell with ISP, 3-volt and low-power
2006-01-01

(369751)

... Designing to a single-cell power supply ... Such a design methodology introduces power inefficiencies ... AVR family of microcontrollers were designed. ...
Thanks to a new Atmel IC design methodology, the EMC constraints are taken into account earlier in the IC design phase. The EMC performances of the Mega32M1 product are improved thanks to some design ...
2008-02-01

(279785)

... to make and promote commercial designs for the ... the information needed for designing extension boards for the ... and before starting the PCB design. ...

... note 1) - PDF printouts of these schematics PCBA archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...

ATF1502AS(L)
(Revision L, 29 pages)

32 Macrocell, Standard and Low-power with ISP
2014-03-12

(956KB)

ATSAMW25-MR210PA
(Revision A, 24 pages)

... 20 11 Design Guidelines ... 6.1.2 Description The ATWINC1500A MAC is designed to operate at low power while providing high data throughput. ...
2015-03-25

(1.6MB)
Appnote describing how to find the information necessary to develop extension boards for the Atmel Xplained Pro evaluation kits. This document also contains some tips and tricks and things to be aware...
2014-01-15

(257KB)

... The display module PDA TM2800 was designed by the Atmel partner Precision Design Associates (PDA) and it contains: • A 2.8 inch LCD display ...
The scope of this application note is to guide the PCB designers to choose an appropriate 16MHz and 32.768kHz crystal, which can satisfy the various application needs based on crystal size, ESR, load ...
2013-01-28

(959kB)

... Management System for Design and Manufacturing of Semiconductor Devices (with Product Design as per Chapter 7.3). An audit ...

Atmel SAM4L Series
(Revision D, 2 pages)

... ensures that devices are designed to consume ... Design with the Atmel Studio integrated development ... Prototype your designs with the Atmel SAM4L ...
2016-01-22

(408KB)

ATPL250A
(Revision F, 28 pages)

... Please refer to the Reference Design for further information. TXRX1 ... Atmel PLC coupling reference designs have been designed to achieve ...
2016-09-22

(1.8 MB)

... SAM4L family is ideal for power-sensitive designs. In this reference design, several low power ... RAM retention The Thermostat is designed to work in ...
... note 1) - PDF printouts of these schematics PCBA archive: - The PCB design file in ... note 1: Most of our board schematics are designed with Orcad. ...
2014-08-11

(1.64 KB / 74.6 MB)