はじめに

ここでは、本製品の評価および作業を開始するために理解する必要がある内容のすべてをご紹介しています。

Atmel SAM D


Buy Now

The Atmel® SAM D21 Xplained Pro evaluation kit is ideal for evaluating and prototyping with the Atmel SAM D21 ARM® Cortex®-M0+ based microcontrollers. Extension boards to the SAM D21 Xplained Pro can be purchased individually.

The ATSAMD21-XPRO evaluation kit does not include extension boards.

The SAM D21 Xplained Pro supports the Atmel I/O1 Xplained Pro, OLED1 Xplained Pro, QT1 Xplained Pro, and PROTO1 Xplained Pro extension boards.

To begin configuring software for your board, please visit our web-based software configuration tool Atmel START. Below you will also find a selection of pre-built demo binaries that can be run by downloading them to the mass storage device that appears when you connect the board to your computer.

主な特長

  • SAMD21J18A microcontroller
  • One mechanical reset button
  • One mechanical user pushbutton — Wake-up, bootloader entry or general purpose
  • One yellow user LED
  • 32.768kHz crystal
  • USB interface, device and reduced host mode
  • 8 Mbit Serial Flash
  • 3 Xplained Pro extension headers
  • Embedded Debugger — Auto-ID for board identification in Atmel Studio. One yellow status LED. One green board power. LED Symbolic debug of complex data types including scope information. Programming and debugging. Data Gateway Interface: SPI, I²C, 4 GPIOs. Virtual COM port (CDC)
  • USB powered
  • Supported with application examples in Atmel Software Framework


注文コード Atmel ストアでの在庫の有無1 単価2 オンラインで購入
ATSAMD21-XPRO



1Backlog orders can be placed for items currently not available.
2Suggested retail price per unit for budgetary use only.

 

ソフトウェア
説明
LED Flasher
LED Flasher
(1.53 KB, 更新日 2016年, 3月)
This pre-built demo will make the User LED on the board flash. Download the file to the mass storage device that appears when you connect the board to your computer to run it. The project files for this demo can be downloaded from Atmel START
LED Switcher
LED Switcher
(1.76 KB, 更新日 2016年, 3月)
This pre-built demo will turn the User LED on/off then the User Button is pressed. Download the file to the mass storage device that appears when you connect the board to your computer to run it. The project files for this demo can be downloaded from Atmel START
USB HID Mouse
USB HID Mouse
(9.10 KB, 更新日 2016年, 3月)
This pre-built demo requires an OLED1 extension board to be connected to the EXT2 header. Connecting the board to the computer using the Target USB connector will make it emulate a mouse over USB HID. Use button 1 & 3 on the OLED1 board to move the pointer left/right. Download the file to the mass storage device that appears when you connect the board to your computer to run it. The project files for this demo can be downloaded from Atmel START

Contents: ATSAMD21-XPRO MCU board