Our services are targeted toward R&D and Production departments of equipment manufacturers in industrial domain, i.e.: consumer, automotive, telecom, radiocom, medical, POS, etc.

• Hardware and Software design
• Technical consulting
• Cost optimisation
• Process simulation
• Software and Hardware specification drafting
• Program coding, testing, integration, validation, qualification
• Technical assistance
• Training

• Design and development of embedded or non-embedded software, usually with sharp real-time constraints, on such targets as Microcontrollers, DSPs, CPLDs, FPGAs, automatisms, industrial PCs, etc.
• Design and development of digital hardware based on microcontrollers, DSPs, programmable logic, etc.
• Design and implementation of complex systems based on electronic and information technologies
• Severely constrained development – product cost, performance, robustness, and optimisation with value and performance analysis.
• Early simulation for concept, process, interface, stability validation
• Technical support for specifications elaboration, hardware and software architecture choices, test and validation.
• Control and knowledge of development suites from third parties (compilers, simulators, debuggers, programmers, etc.) on several targets, along with simulation tools (MatLab, Simulink, etc.)

• Device driver and board support package development
• Automotive and Autosar tools and services
• Software development tool development
• Safety critical software development
• Application development
• Communication systems (TCP/IP, CAN, Bluetooth, etc.)
• ASIC/FPGA design
• Electronic board design
• Embedded Linux
• Project and product management

• Consultants for ATMEL AVRs/AT89C5X Microcontroller in Italy
• Software Design (Labwindows CVI)
• Firmware Design (AVRs, AT89C5Xs, H8 Tiny, H8S, SH2)
• Hardware Design (Digital and FPGA, Analog)
• PCB Design
• Hardware Engineering, Prototyping and Testing Products
• Embedded Low Speed Modems for Telecontrol and P.O.S.
• Burn-In and Test Systems for Telecommunications and Aerospace
• System eXecutive (Kernel for Real Time Embedded Applications)

• Consultancy, design, development, through full production
• Early adopters of AVR
• Established 1990
• Hardware and software designs for innovative embedded solutions
• Embedded software written mostly in C with some assembler where necessary
• Broad range of embedded solutions from LED flashers to hydraulic lift controllers, from simple I/O units to fully networked RFID access control systems, from capacitive proximity sensing plates to touch-sensitive keyboards
• Networking systems including RS232, RS485, CAN and internet
• Multi-processor solutions with intra-processor communications
• PC connectivity for configuration and real-time monitoring
• Local or remote(internet) connections via bespoke Windows software
• Dynamic Web servers / Web browser interfaces
• Windows software written in C++

Dedicated Controls takes customer's concepts, requirements or technical specification and produces finished designs. The designs include all electronic and software development, circuit diagrams, PCB layouts, parts list and technical documentation. Software development can include both embedded or PC applications. Customers can have the option of maintaining the source code themselves in-house or continued maintenance and development support from Dedicated Controls.

Specialising in low power battery operated designs. Typically used for Intrinsically safe, thermocouple / RTD, down hole water meter monitoring, energy management transmitters using VHF /UHF radio telemetry and embedded TCP/IP. Dedicated Controls has developed more complex electronic software systems used within the UK road traffic management control.

Dedicated Controls was also invited to join the low power radio association, which is the voice for the low power radio industry, this allows Dedicated Controls to keep up to date with changes in the government licensing laws and the moving technology.

• RF design and PCB layout to 5 GHz
• Low noise analogue circuitry
• PSTN modem and VoIP design
• Low power / battery operation

Some of our designs may only be manufactured in small volumes, but some have resulted in sales of several million units. This has allowed us to understand very high volume production engineering and component selection, high reliability, harsh environmental conditions, Far East manufacturing methodologies, and worldwide certifications for safety, telecom, RFI, EMC and RF.

Reports, PCB layouts, schematics, BOMs, and all technical documentation receive the same rigorous attention to detail as the electronic design itself.

• Domotic
• Access control
• Data transceiver
• Industrial application

Mission: To design quality products and provide professional services that help our customers be competitive and profitable. To counter technical challenges with innovative and cost effective solutions. To exploit the innovation potential that lies in the early stages of product design. To utilize our intellectual property to bring benefits to Society.

Focus: AVR-based systems and building blocks for designers of digital products.

• Requirements engineering
• Microprocessor hardware design, specifically AVR
• Software and firmware design
• Embedded systems design
• Real Time Systems, C, C++, Pascal, BASIC, Assembler
• Schematic capture, PCB design, industrialization
• Project management

• Project management
• Product specification
• Product cost estimating
• Generation of customer requirement specifications
• Overall system design
• PCB-design
• Proto type assembly and testing
• Firmware development
• Microcontrollers: Assembler, C
• Software development (PC): Delphi, C, C++, Java, HTML
• Hardware development: specific applications or whole systems
• Supported RS232 / RS485, CAN, LIN, IIC, SPI, Ethernet, TCP/IP, USB
• Contract manufacturing services

• Use of AVR as a system health monitor
• ETX baseboard with 8 integrated AVRs
• Power manager for GSM / GPRS radio
• Zigbee radio module

• Microcontroller hardware design
• Embedded Systems design
• Real Time Control Systems (PLL, PID, etc)
• Firmware development
• Complete Turn-Key-System Implementations
• Win32 or Linux setup and management software development

• Project management
• Product specification
• Microcontrollers
• Analog and digital electronics
• Low power and battery applications
• IR technology for remote control
• Speech technologies
• Electronic components, manufactures, sources and prices
• EMC
• Software drivers
• Software application
• Operating systems for embedded solutions

• Fire alarm systems
• Gas alarm systems for ship
• Control unit for ice makers
• Environment control systems for buildings
• Camera control systems
• Products based on different types of speech technology
• Control unit for different medical products
• Mobile and stationary earth fault alarm systems
• Several support products for disabled people

• Projects using AVR, ARM7, 8051, PIC, MSP430, Cypress CY7C63
• Embedded applications written in C & Assembler
• GPS / GSM / Ethernet / RS232 / RS485 / USB / Bluetooth projects
• Automotive, Industrial & Consumer design work
• Low power and battery applications
• Hardware & PCB Design / Layout
• Full project management
• Contract manufacturing services

Noca AS is experienced in AVR design and have had several AVR designs in different areas. Combined with the production unit, Noca AS is a competent partner from idea to full produciton.

We have established long-term relationships and partnerships with a number of local, national and international companies in a wide range of industries including aerospace, utilities, LED lighting, military and transport.

Our modern, well-equipped offices, workshop and laboratory gives us the capability to provide total system solutions from conception to production.

At PJB Systems we recognize that, with ever-decreasing product lifecycles, the ability to react to market trends is imperative. We are able to react quickly to new ideas and changes in customer requirements and have a reputation for being realistic with timescales and costs.

Our commitment to quality and excellence, with BS EN ISO9001 approval, ensures that our standard of service is continually reviewed and improved.

In addition to MCU software Red Creations can develop PC software for producing, testing, monitoring and controlling MCU based systems.

Red Creations can help clients choose which MCU is appropriate for their requirements. If printed circuit board design is required then Red Creations has partner companies who have considerable experience in designing suitable hardware. Over recent years the majority of projects undertaken by Red Creations have involved using the AVR range of MCUs from Atmel. The remaining products have used 8051 based MCUs from various manufacturers and the PIC range of MCUs from Microchip.

• Wireless Telephone Extension
• Digital Sound Sample Module
• Telephone Subscriber Pulse Metering Unit
• Intelligent Winch Controller
• Multi-tone Alarm Sounder
• Compressor Controller
• Restaurant Lavatory Countdown Timer
• Doorbell Adjustable Mute Timer

• UNIX front end Server systems
• Network systems
• C and C++
• Windows, Linux and Unix software
• System Control Software
• Microcontroller based designs including Atmel AVR and Atmel ARM
• Microcontrollers RISC
• Microprocessors, 8, 16, 32 and 64 Bit
• Micro-electronics PALS, GALS and Logic
• Communications, RS232, RS485, Ethernet, CanBus, RF, TCP/IP and UDP
• Fibre & Copper Networks
• Sensors Light, Sound, Hall Effect, Movement
• Analogue and Power

• Home automation
• Digital ballasts for all types of lamps include HID, fluorescent and incandescent
• Power controllers and power supplies
• RF transceiver for data telemetry