Начало работы

Все необходимое для начала работы с продуктом



Программное обеспечение



ATF697FF Errata

(размер файла: 303KB, 9 стр., ред. B, обновлено: 9 16 г.)

ATF697FF Rad-Hard Reconfigurable Processor

ATF697FF Rad-Hard Reconfigurable Processor Complete

(размер файла: 7.62 MB, 254 стр., ред. D, обновлено: 3 14 г.)
Еще документы...

The ATF697FF is a multichip module integrating the Atmel® AT697F SPARC V8 rad-hard processor, the Atmel ATF280F SRAM-based FPGA and an internal PCI link. The ATF697FF delivers best-in-class performance, running at up to 100MHz, as well as low power, down to 0.7W for space applications today. By executing powerful instructions in a single clock cycle, the processor unit achieves throughputs around 1 MIPS per MHz, allowing you to optimize power consumption versus processing speed.

The two dies have been especially designed for space applications by implementing hardened cells, on-chip concurrent transient and permanent error detection and correction, and permanent self-integrity check mechanism. The ATF697FF is designed to be used as a building block in computers for on-board embedded real-time applications. It brings up-to-date functionality and performance for space applications. The module only requires memory and application-specific peripherals to be added to form a complete on-board computer.

Both the processor unit and the reconfigurable unit are manufactured using the Atmel 0.18μm rad-hard AT58KRHA CMOS technology.

Ключевые особенности

  • 32-bit SPARC V8 reconfigurable processor with embedded FPGA
  • Operates at 90MIPS@SYSCLK=100MHz
  • Low power consumption at 0.7W
  • 1.8V (core) and 3.3V (I/Os) supply range
  • Total ionizing dose > 300Krad
  • Qualified ESCC and QML-V

Основные параметры


Temp. Range (deg C):

-55 to 125

Operating Voltage (Vcc):

1.65 to 1.95/3 to 3.6