New Wi-Fi Solutions for IoT



Программное обеспечение



ATSAMW25-MR210PB Preliminary

(размер файла: 1.8MB, 25 стр., ред. B, обновлено: 5 16 г.)
Еще документы...

The Atmel® SmartConnect SAM W25 is a low-power Wi-Fi certified module.

This highly integrated module offers the ideal solution for designers seeking Wi-Fi connectivity.

The SAM W25 integrates 802.11 IP stack on top of the Wi-Fi core and fully covers RF certifications.

The SAM W25 from Atmel opens the door to the Internet of Things for a vast array of battery-powered devices and applications requiring the integration of WLAN connectivity without compromising on cost and power consumption.

The SAM W25 module is based on Atmel’s industry-leading WINC1500 Wi-Fi core combined with Atmel’s latest ARM® Cortex® -M0+ based microcontroller technology. This turnkey system provides an integrated software solution with application and security protocols such as TLS and integrated network services (TCP/IP stack).

Ключевые особенности

  • IEEE 802.11 b/g/n (1x1) for up to 72 Mbps
  • Integrated PA and T/R switch
  • Superior sensitivity and range via advanced PHY signal processing
  • Wi-Fi Direct, station mode and Soft-AP support
  • Supports IEEE 802.11 WEP, WPA
  • On-chip memory management engine to reduce host load
  • 4 Mbit internal Flash memory with OTA firmware upgrade
  • SPI, UART and I2C as host interfaces
  • TCP/IP protocol stack (client/server) sockets applications
  • Network protocols (DHCP/DNS), including secure TLS stack
  • WSC (wireless simple configuration WPS)
  • Atmel Wi-Fi SoC and Atmel│SMART SAM D21 ARM Cortex-M0+ based MCU
  • Can operate completely host-less in most applications

Основные параметры


Pin Count:




TWI (I2C):


USB Transceiver:


Temp. Range (deg C):

-40 to 85

Operating Voltage (Vcc):

2.7 to 3.6

Frequency Band:

2.4 GHz 802.11b/g/n Wi-Fi

Max Data Rate (Mb/s):