Get Started

We'll tell you all you need to know to start evaluating and working with this product.




Documents for IEC 60730 Safety Software Library


Application Note

PDF

Software

Description

Atmel AVR1610: Guide to IEC 60730 Class B Compliance with XMEGA

Atmel AVR1610: Guide to IEC 60730 Class B Compliance with XMEGA

Atmel AVR1610: Guide to IEC 60730 Class B Compliance with XMEGA

(file size: 367KB, 25 pages, revision A, updated: 07/2012)

IEC 60730 is a safety standard for household appliances that addresses many aspects of both product design and operation. This standard is also referred to by other standards for safety-critical devices, for example, IEC 60335. System-wide compliance with this standard is necessary for an appliance to be certified as safe to operate. This application note is a guide to compliance with Annex H of the standard, which regards electronic controls.

AVR998: Guide to IEC60730 Class B compliance with AVR Microcontrollers

AVR998: Guide to IEC60730 Class B compliance with AVR Microcontrollers

AVR998: Guide to IEC60730 Class B compliance with AVR Microcontrollers

(file size: 324KB, 22 pages, revision C, updated: 09/2016)

This application note describes the 'Class B' software classification, refering to embedded firmware which is intended to prevent unsafe operation of controlled equipment and provides guidelines for compliance with the 'Class B' classification as it relates to AVR devices.

Other

PDF

Software

Description

Certificate for Class B Library for Atmel SAM D2x

Certificate for Class B Library for Atmel SAM D2x

(updated: 01/2014)

Atmel Class B Certificate documentation.

User Guide

PDF

Software

Description

Atmel SAM D QTouch Safety Library Peripheral Touch Controller User Guide

Atmel SAM D QTouch Safety Library Peripheral Touch Controller User Guide

(file size: 1.09MB, 113 pages, revision G, updated: 07/2016)

This user guide contains information that enables implementation of capacitive touch solutions using Peripheral Touch Controller on Atmel® ARM® Cortex®-M0+-based SAM D Microcontrollers and Atmel QTouch® libraries. This guide is a functional description of the safety library software, tuning guide, programming interface and the supported reference systems.