The STK600 has three voltage sources and one clock generator.


The setpoint of the three voltage sources (VTG, ARef0 and ARef1) is adjusted by the means of three sliders. It is also possible to type a voltage in the Generated textboxes below the sliders. When you drag the sliders, the text boxes will update. And when you type a value in the text box, the slider will move.

After adjusting the setpoints, press the Write button to apply the changes. The values are sent to the tool, and measure values are read back.

Measurements are shown in the Measured row, and shown as blue columns as part of the slider controls. The measured values cannot be edited.

Press the Read button to read both the setpoint (Generated) and the Measured values from the STK600.

The Clock generator is also adjusted by dragging the slider or typing into the text box below. Press the Write button to apply the new value.