入门指南

为您提供开始评估和使用此产品之前所需了解的全部信息。

New Wi-Fi Solutions for IoT


Datasheet

PDF

软件

说明

ATWINC1500B

ATWINC1500B Complete

(文件大小: 1.9MB, 35 页数, 修订版 B, 更新时间: 03/2016)

ATWINC1500-MR210PB

ATWINC1500-MR210PB Complete

(文件大小: 1.4MB, 28 页数, 修订版 B, 更新时间: 03/2016)
更多文档...

Atmel® SmartConnect-WINC1500 is an IEEE 802.11 b/g/n IOT network controller SoC. It is the ideal add-On to existing MCU solutions bringing WiFi and Network capabilities through UART or SPI-to-WiFi interface. The WINC1500 connects to any Atmel AVR or SMART MCU with minimal resource requirements. The WINC1500 most advanced mode is a single stream 1x1 802.11n mode providing up to 72 Mbps PHY throughput. WINC1500 features fully integrated Power Amplifier, LNA, Switch and Power Management. The WINC1500 provides internal Flash memory as well as multiple peripheral interfaces including UART, SPI, and I2C. The only external clock source needed for the WINC1500 is a high-speed crystal or oscillator with a wide variety of reference clock frequencies supported (between 12 – 32 MHz). The WINC1500 is available in a QFN package.

关键特性

  • Single-band 2.4GHz b/g/n
  • Extreme low power
  • Compact footprint: 33.8 x 14.9 mm
  • Operating Voltage: 3.0 to 4.2
  • Serial Host Interface SPI or UART
  • Worldwide acceptance: FCC (USA), CE (Europe) and TELEC
  • RoHS compliant
  • Security protocols supported – WPA/WPA2 Personal, TLS, SSL
  • Network services – DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTP

关键参数

参数

Pin Count:

40

SPI:

1

TWI (I2C):

0

UART:

1

Temp. Range (deg C):

-40 to 85

Operating Voltage (Vcc):

3.0 to 4.2

Frequency Band:

2.4 GHz

Max Data Rate (Mb/s):

72

Antenna Diversity:

No

External PA Control:

No

 

» Contact your local Atmel Sales Representative.