Search Results:
Search
  • Results
Showing 1 - 943 of about 943 results.

... Figure 2. Level 2 Approach Schema As the model specifies, a pull-up current supply in WK was modeled in relation to the power supply state. ...
2014-04-01

(3,946 KB)

High Level Security Models
(Revision A, 11 pages)

... In following section on models, the attacks will be covered for applicability to the specific model and configuration of the systems to counter the ...
2009-03-01

(126052)
The AT86RF230 Software Programming Model (SWPM) provides a reference for developers utilizing the AT86RF230 radio transceiver as effective as possible.
2008-05-01

(233633)

The AT86RF231 Software Programming Model (SWPM) provides a reference for developers utilizing the AT86RF231 radio transceiver as effective as possible.
2008-05-01

(498652)

... note that the signal generated from the periphery of the model are TxD ... signal comes from an imaginary node (remote signal) and is modeled as a ...
2014-04-01

(2,604 KB)

... Figure 2. Level 2 Approach Schema As the model specifies, a pull-up current supply in WK was modeled in relation to the power supply state. ...

... note that the signal generated from the periphery of the model are TxD ... signal comes from an imaginary node (remote signal) and is modeled as a ...

... Atmel-11217A-ATARM-SAMA5D3x-High-Speed-Simulation-Using-IBIS-Models- ApplicationNote_31-Jul-14 Step 5. Assign IBIS model for ICs ...
The AT86RF212 Software Programming Model (SWPM) shall provide a reference for developers utilizing the radio transceiver AT86RF212 as effective as possible.
2009-08-01

(609129)

This application note serves as a guide on how to use the I/O Buffer Information Specification (IBIS) models of Atmel | SMART SAMA5D3 embedded MPUs and the external peripherals to perform boarrd-level...
2014-07-31

(2.5 MB)
... Note: 1. The model doesn't work with the version ... there are no problems using the AMS Designer package models. ... Table 5-1. Modelling Parameters ...
2015-06-01

(1,058 KB)

... Note: 1. The model doesn't work with the version ... there are no problems using the AMS Designer package models. ... Table 5-1. Modelling Parameters ...
ATA6560 - ATA6560 - CAN Transceiver VHDL-AMS Model (Level 1)
2015-07-01

(916 KB)

... runtime-opti- mized behaviorally modeled high-speed ... Specification for Transceiver Simulation Models V1.1 ... 2010-02-22 [2] Model Conformance Test ...

... runtime-opti- mized behaviorally modeled high-speed ... Specification for Transceiver Simulation Models V1.1 ... 2010-02-22 [2] Model Conformance Test ...

... runtime-opti- mized behaviorally modeled high-speed ... Specification for Transceiver Simulation Models V1.1 ... 2010-02-22 [2] Model Conformance Test ...
This Application Note provides a simple method for modeling the active and static power consumption of a AT6005 design.
1999-09-01
Page 1. Page 2. Page 3.
Page 1.
Page 1. Page 2. Page 3.
Page 1. Page 2. Page 3.
Page 1. Page 2.
Page 1. Page 2.
Page 1. Page 2.
Page 1. Page 2.
Page 1.
Page 1. Page 2.
Page 1. Page 2. Page 3.
Page 1. Page 2.
Page 1. Page 2. Page 3.
Page 1. Page 2. Page 3.
Page 1.

... 1, Part-number, Package, Vendor, Model, Adapter, Soft. ... 422, AT87F51, DIL40, BP Microsystems, See website for models, See website for adapters, Last ...
This Excel spreadsheet provide summary information on device programmers supporting Atmel 8051 microcontrollers
2007-09-01

(432128)
... layout and silicon models. ... gnd GND |vdd vdd POWER | |*** Model tristate_driver ...
2004-05-01

(17139)
... layout and silicon models. ... Page 2. | |*** Model tristate_driver ...
2004-05-01

(16447)

... layout and silicon models. ... gnd GND |vdd vdd POWER | |*** Model tristate_driver ...

... layout and silicon models. ... Page 2. | |*** Model tristate_driver ...

... 1. Electrical Model of the Mechanical Impedance of a Crystal The parasitic capacitance of the crystal's electrodes and the package are modelled by ...
Describes the use of Crystal Oscillators and PLLs in the context of AT91M42800A and AT91M55800A microcontrollers.
2001-09-01


... Channel Model – USB CAPI Model • Networking – Ethernet Networking Model – ATM Networking Control Model Some of these models and their ...

... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester @ 25C ...

AT91 USB CDC Driver Implementation
(Revision B, 20 pages)

Explains how to implement the Communication Device Class (CDC) driver on AT91 microcontrollers. Describes a device-side USB framework that enables rapid development of USB-compliant class drivers such...
2009-07-01

(374967)
... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester @ 25C ...
2005-08-01

(58719)
... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester @ 25C ...
2005-08-01

(58664)
... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester @ 25C and ...
2005-08-01

(58758)
... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester @ 25C and ...
2005-08-01

(58747)
... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester @ 25C and ...
2005-08-01

(58748)
... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester @ 25C and ...
2005-08-01

(58752)
... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester @ 25C & ...
2005-08-01

(58460)
... 256A Lot Number: Lot#3g0820 Quantity Tested: 3/ lot per Voltage Test Temperature: 25C ESD Stress Equipment:: ORYX Model 11000 ESD Test ...
2005-08-01

(50830)

... Modeling, Simulation To better design the pinch-detection algorithm, the ... Motor Model The DC universal motor used can be modeled using a ...
... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester @ 25C ...
2005-08-01

(47306)
This application note provides an example of how to create an anti-pinch system for power windows. Based on Speed and Current parameters measured out of the window DC motor, it supports the FMVSS118 a...
2006-12-01

(516455)

... of the simulation-runtime-optimized behaviorally modeled Atmel® high-speed CAN transceiver ATA6560. This “Demo Level 1” model is intended to ...

... 2.1.0.2 Models The CDC Class Specifications introduces various models of communication. Each model is characterized by the type of interface ...
This application note describes how to start and implement a Host CDC application using the STK525 or USBKEY starter kit, and finally introduces a simple example of dual USB-UART bridge between two PC...
2007-09-01

(1684150)

... of the Atmel® simulation-runtime-optimized behaviorally modeled high-speed CAN transceiver ATA6560. This “Demo Level 2” model is intended to ...
ATA6560 - CAN Transceiver VHDL-AMS Demonstration (Level 2)
2015-06-01

(113 KB)
ATA6560 - CAN Transceiver VHDL-AMS Demonstration (Level 1)
2015-06-01

(92 KB)

... Note: 1. Timing models for the ATF15XX devices are in their own specific ... Figure 1. AT22V10, ATV750, ATV750B, and ATV2500 Timing Model ...
... 2 1. Thermal Model of the Device Mounted on PCB Even though ... chip thermal behavior. Figure 1-1. Simplified Thermal Model ...
2015-05-01

(1,039 KB)
The emerging Trusted Platform Module (TPM), as driven by the industry consortium Trusted Computing Group (TCG), is a standard that allows affordable authentication, encryption, and network access to b...
2004-03-01

(161661)

... Input/output Buffer Information Specification is a behavioral-modeling specification ... 3.1 Starting the Analysis: The AT91 IBIS Model The starting point ...
... AT24C04A Lot Number: Lot#4e2825 Quantity Tested: 3/ lot per Voltage Test Temperature: 25C ESD Stress Equipment:: ORYX Model 11000 ESD ...
2005-08-01

(37914)
This application note alerts the customer to Signal Integrity issues before the start of a design and provides remedy and selection strategy as well.
2008-06-01

(690473)

... Figure 2-2. Model of a BLDC Motor with current flows versus rotor positions ... The BEMF can be modeled as a voltage source in series with each coil. ...

... 2 1. Thermal Model of the Device Mounted on PCB Even though ... chip thermal behavior. Figure 1-1. Simplified Thermal Model ...
This application note describes how to implement a sensorless commutation on BLDC motors and provides all information that is relevant for an implementation of sensorless commutation using the Atmel d...
2013-07-29

(487KB)

... This application note describe following topics: • TCP/IP Protocol Model • Ethernet Peripheral overview • CycloneTCP overview • HTTP Server ...
This application note describes how to implement a sensorless commutation of BLDC motors with the ATAVRMC100 developement kit.
2006-12-01

(1449093)

This application note addresses the use of Ethernet MAC (GMAC) peripheral on SAM V70/E71 devices in network applications.
2016-06-27

(3.9MB)

AT91R40008
(Revision E, 20 pages)

The AT91R40008 Electrical Characteristics gives the electrical and timing chacteristics of the AT91R40008.
2005-12-01

(348689)

AVR040: EMC Design Considerations
(Revision E, 22 pages)

This application note covers the most common EMC problems designers encounter when using microcontrollers.
2016-11-01

(284KB)

... Figure 3-1. MAC layer reference model ... This information flow is modeled by discrete, instantaneous events, that characterize the provision of a ...

... Reliability Modeling ... for thermal acceleration and/or the Eyring Model for voltage ... Other models, such as Coffin-Manson (temperature cycling) may ...
This application note describes how to implement a control of Brushless DC motor (BLDC) in sensor mode using the ATxmega128A1, Atmel® AVR® microcontroller and the ATAVRMC323 development kit.
2014-03-19

(835KB)

... with this MTBF calculation: as the MIL-217 model is pessimistic with respect to observed values due to the way the data/models are obtained (test ...

IEEE 802.15.4 MAC
(Revision A, 35 pages)

This user guide describes the interface between the application/network and the MAC layer as implemented by Atmel's IEEE 802.15.4 compliant firmware. See Software section to download the package.
2006-09-01

(1326545)
... in every make and model. No longer the reserve of the high-end marquis and models, the use of electronic systems for every aspect of an ...
2014-03-26

(730 KB)
This application note provides directions to hardware designers when designing a board based on one of the AT91x40 microcontroller series and the AT91FR40x Flash-based products. The focus is on the ve...
2005-03-01

(167899)
... 020A/010A Lot Number: LOT# 2h0444 Quantity Tested: 3/ lot per Voltage Test Temperature: 25C ESD Stress Equipment:: ORYX Model 11000 ESD ...
2005-08-01

(44778)
... AT25640A Lot Number: Lot#2h0487 Quantity Tested: 3/ lot per Voltage Test Temperature: 25C ESD Stress Equipment:: ORYX Model 11000 ESD ...
2005-08-01

(37387)
... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester Quantity ...
2005-08-01

(50826)
... Lot Number: Lot#c3e5480/3e5480 Quantity Tested: 3/ lot per Voltage Test Temperature: 25C ESD Stress Equipment:: ORYX Model 11000 ESD ...
2005-08-01

(49028)
... AT25320A Lot Number: Lot#2h0489 Quantity Tested: 3/ lot per Voltage Test Temperature: 25C ESD Stress Equipment:: ORYX Model 11000 ESD ...
2005-08-01

(37511)
... AT25160A Lot Number: Lot#3g0848 Quantity Tested: 3/ lot per Voltage Test Temperature: 25C ESD Stress Equipment:: ORYX Model 11000 ESD ...
2005-08-01

(47941)
... AT24C04 Lot Number: Lot#3e3886 Quantity Tested: 3/ lot per Voltage Test Temperature: 25C ESD Stress Equipment:: ORYX Model 11000 ESD ...
2005-08-01

(37669)
... ESD Characterization ORYX Model 11000 ESD Test System Pass/Fail via Final Production Test Program: EPRO Model 142AX Tester Quantity ...
2005-08-01

(48614)
This application note introduces methods for preventing radiated emission in the PCB board design of Atmel ARM-based microcontrollers.
2014-01-09

(347 KB)

... 2. Brushless DC Motor Theory of Operation 2.1 Simplified Model of a BLDC Motor ... Figure 2-1. Simplified Model of a BLDC Motor ...

... CAD tools have incredible 3D modeling capability ... 1. The Blivet, a Great Looking 3D Model With DFM ... design process, paper mock-up models are an ...
This Application Note details implementation of a 16-Tap FIR Filter Macro in the AT6000 Series FPGAs.
1997-08-01

AT697
(Revision E, 11 pages)

... This Multiplier/Divider failure is due to a LEON2 VHDL model error. ... This “Call Return Address” failure is due to a LEON2 VHDL model error. ...
2014-12-22

(251KB)
This document illustrates how to configure and use Altium to layout the ATSAMR21 Wireless SoC.
2015-07-27

(1.4MB)

... The BEMF can be modeled as a voltage source in series with each coil ... Figure 2-1. Simplified Model of a two-pole BLDC Motor (with two successive ...

AT91M40800
(Revision C, 21 pages)

The AT91M40800 Electrical Characteristics gives the electrical and timing chacteristics of the AT91M40800.
2004-11-01

(299494)
This application note covers the configuration, setup and usage of the I2C framework on Linux. The application note gives also examples of how the Linux API can be used to form SMBus commands which ca...
2008-08-01

(11146)

... Reliability Modeling ... for thermal acceleration and/or the Eyring Model for voltage ... Other models, such as Coffin-Manson (temperature cycling) may ...

... Thermal Data In Table 4, the device lifetime is estimated with the MIL-217 standard in the “moderately controlled” environmental model (this model ...
This Application Note shows different graphical timing models that can help the user visualize the AC timing of the various Atmel PLD families of devices.
1999-08-01

AT88SA102S
(Revision H, 25 pages)

Product Authentication Chip. Not Recommended for New Designs. Replaced by ATSHA204.
2012-09-05

(248KB)

... The equivalent model, shown in Figure 4, consists of two resonant circuits: ... Bias Level Page 4. 4 4363A–80C51–07/04 Figure 4. Crystal Models. ...

... The equivalent model, shown in Figure 4, consists of two resonant circuits: ... Bias Level Page 4. 4 4363A–80C51–07/04 Figure 4. Crystal Models. ...

[Disclaimer] Generated for modeling purposes based ... pF 3.00pF | |*** Model input ...

... This explains why the IBIS model file is becoming important for applications having high frequency bus accesses. The electronic ...

... This explains why the IBIS model file is becoming important for applications having high frequency bus accesses. The electronic ...

... PCB Tracks A connection can be modelized by a RL model as it is shown in Figure 8. In low fre- quency the connection is a pure resistor and in ...
... PCB Tracks A connection can be modelized by a RL model as it is shown in Figure 8. In low fre- quency the connection is a pure resistor and in ...
2003-08-01

(315016)

... the poles ( ep s ), and a sixth-order structure that models the zeroes ... In order to ensure stability the coefficients in the pole-modeling structure must ...
The AT91M42800A Electrical Characteristics gives the electrical and timing chacteristics of the AT91M42800A.
2002-06-01

... The complete PSPICE simulation model is shown in figure #1 (see next ... control is done with the use of analog behavioral models which represent ...
... The complete PSPICE simulation model is shown in figure #1 (see next ... control is done with the use of analog behavioral models which represent ...
2004-01-01

(440689)

... Thermal Data In Table 4, the device lifetime is estimated with the MIL-217 standard in the “moderately controlled” environmental model (this model ...
This application note focuses on decoding the ADPCM signal, Adaptive Differential Pulse Code Modulation, and turning it to a signal suitable for loudspeakers. It targets an ATmega128 device.
2004-11-01

(120349)

This application note delivers an implementation of Sensor Field Oriented Control algorithm for brushless DC motor on Atmel 32-bit AVR UC3 B series microcontrollers.
2010-03-01

(48796541)

The high-performance AT91M55800A microcontroller features a large number of internally banked registers, making the device ideal for real-time control applications and provides a highly-flexible and c...
2004-01-01

(349813)

... AVR191 Required parameters Anti-pinch application note AVR480 describes a window lift model. ... Figure 2. Second order motor model ...

... Thermal Data In Table 5, the device lifetime is estimated with the MIL-217 standard in the “moderately controlled” environmental model (this model ...
This document has two main objectives. The first one is to describe how to easily migrate from a RS-232 to the USB into the firmware using the Atmel USB RS232 Virtual COM port library. The second one ...
2004-01-01

(318944)

This application note describes the CAN protocol and its integration inside the CANIF module. Finally, it deals with code examples to get up and running quickly. A driver interface written in C is inc...
2010-11-01

(385398)

... USB: Universal Serial Bus • CDC: Communication Device Class • ACM: Abstract Control Model • VID: Vendor Identifier • PID: Product Identifier ...
... Device: AT24C512 (AT3552T) Lot Number: 2h1712 Quantity Tested: 3/ lot per Voltage ESD Stress Equipment:: ORYX Model 11000 ESD Test ...
2005-08-01

(50387)

... 4.2 ISO-OSI* Reference Model The CAN protocol is defined as the 2 first layers of the ISO-OSI model: ... Figure 4-1. ISO-OSI Reference model ...

SAMA5D3 Layout Recommendations
(Revision B, 12 pages)

This application note provides recommendations on how to place components and route critical traces while preserving the signal integrity in a SAMA5D3 platform.
2016-04-11

(945 KB)

UL Certificate of Compliance Atmel AT42QT1245
(Revision E355518-20121026, 2 pages)

... and the manufacturer's identification and catalog number, model number or ... Sensing Integrated Circuits - Safety Controls), Models AT42QT1244-AU ...
2015-10-12

(408KB)

UL Certificate of Compliance Atmel AT42QT1244
(Revision E355518-20121026, 2 pages)

... and the manufacturer's identification and catalog number, model number or ... Sensing Integrated Circuits - Safety Controls), Models AT42QT1244-AU ...
2015-10-12

(408KB)

... and the manufacturer's identification and catalog number, model number or ... Sensing Integrated Circuits - Safety Controls), Models AT42QT1244-AU ...

... and the manufacturer's identification and catalog number, model number or ... Sensing Integrated Circuits - Safety Controls), Models AT42QT1244-AU ...

... and the manufacturer's identification and catalog number, model number or ... Sensing Integrated Circuits - Safety Controls), Models AT42QT1244-AU ...

UL Certificate of Compliance Atmel AT42QT1481
(Revision E355518-20121026, 2 pages)

... and the manufacturer's identification and catalog number, model number or ... Sensing Integrated Circuits - Safety Controls), Models AT42QT1244-AU ...
2015-10-12

(408KB)

... and the manufacturer's identification and catalog number, model number or ... Sensing Integrated Circuits - Safety Controls), Models AT42QT1244-AU ...

UL Certificate of Compliance Atmel AT42QT2640
(Revision E355518-20121026, 2 pages)

... and the manufacturer's identification and catalog number, model number or ... Sensing Integrated Circuits - Safety Controls), Models AT42QT1244-AU ...
2015-10-12

(408KB)

... The most common stack arrangements of 8-layer and 10-layer models used in our designs are listed below. ... 8-layer model: ...
This Application Note shows how to implement a LIN (Local Interconnect Network) slave task on tinyAVR and megaAVR devices without the need for any external components.
2002-05-01

(143208)

Describes how to use the AT91EB40A Evaluation Board based on the AT91R40008 microcontroller to control an AT91 ARM7TDMI® processor via the standard ARM JTAG-ICE interface.
2003-01-01

(517955)

... show how to implement the protocol for the physical layer and the data link layer according to the two lowest levels of the ISO/OSI reference model. ...

... Three-layer Model of AT91 ARM7TDMI Driving an AT91 ARM7TDMI processor is represented by the layer model in Figure 1. ...

... 32126A-AVR32-06/09 4 Motor Control Theory 4.1 General Model. ... Applying the Lenz-Faraday model, we have: [ ] [ ] abc abc abc dt d IR V Φ + = ...
The purpose of this document is to explain how to adapt an anti-pinch algorithm to a specified powered window.
2006-11-01

(3028916)

... A more practical solution is to have one shared key for all cars of one particular model, which means that transmitters must be preprogrammed with ...

... A geometrical model can be found on www.atmel.com as T3.NEC file. ... It can only be a tool to calculate modeled behavior. ...

... detailed information on the cryptographic protocols, algorithm test values and usage models. ... prevent the host chip from being used to model a valid ...
This application note describes a Secure Rolling Code Algorithm transmission protocol for use in a unidirectional wireless communication system.
2015-07-01

(841 KB)

... in the fall of 1908, very little had changed in the Model T's design. ... their way into newer models to address the need for the increased bandwidth of ...
2014-03-26

(321 KB)

AT88SA10HS
(Revision H, 24 pages)

CryptoAuthentication Host Security IC. Not Recommended for New Designs. Replaced by ATSHA204.
2012-09-05

(250KB)
This application note describes the PCB antenna used on the Radio Controller Board as a part of the ATAVRRZ200. This kit is designed for the evaluation of the Atmel AT86RF230 2.45 GHz radio transceive...
2007-08-01

(7704132)

... There are many microstrip calculators available on the internet and included in RF modeling software. ... Figure 2-1. Classic Microstrip Model. ...
This application note outlines practical RF layout using microstrip to connect wireless micro controllers with baluns and antennas. Unbalanced and Balanced (differential) microstrip techniques are dis...
2013-05-02

(1.5MB)

... Reset*/ RawNandFlash_Reset(raw); /* If model is not provided, autodetect it*/ if (!model) { ... Copy provided model*/ raw->model = *model; } ...
Describes how to interface NAND Flash memory to SAM3X microcontrollers.
2012-07-25

(688151)

... Personalize Data/OTP Zones – Personalize Data zone to store data such as keys, calibration data, model number, etc. ...

AVR2021: AT86RF231 Antenna Diversity
(Revision B, 20 pages)

This application note describes the usage, design, and layout of the AT86RF231 Antenna Diversity. The information provided is intended as a helping hand for hardware designers to make use of the AT86R...
2008-07-01

(321559)
... Personalize Data/OTP Zones – Personalize Data zone to store data such as keys, calibration data, model number, etc. ...
2015-07-11

(299KB)

... Failure Rate: 12 FITS (344K device-hours) / Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 5 FITS (3M device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.7 eV). ...

... Failure Rate: 3 FITS (2,868K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 3 FITS (3,235K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... 3 Failure Rate: 6 FITS (840,184 device-hours) 3 Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 10 FITS (1,587K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 15 FITS (1,099,572 device-hours) / Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 5 FITS (4.7M device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.7 eV). ...

... Failure Rate: 8 FITS (2,058K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 4 FITS (1.8M device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.7 eV). ...

... Failure Rate: 14 FITS (270,296 device-hours) / Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... 3 Failure Rate: 6 FITS (731.5K device-hours) 3 Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 7 FITS (1,696K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 2 FITS (4.9M device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.7 eV). ...

... 3 Failure Rate: 7 FITS (680K device-hours) 3 Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 4 FITS (1,560K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 11 FITS (590,760 device-hours) / Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 7 FITS (4,168K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... 3 Failure Rate: 215 FITS (20K device-hours) 3 Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 17 FITS (229,000 device-hours) / Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 6 FITS (753,260 device-hours) / Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 8 FITS (1,954K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 7 FITS (2,529K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 10 FITS (616,196 device-hours) / Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... 3 Failure Rate: 3 FITS (1,819,008 device-hours) 3 Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 16 FITS (249,560 device-hours) / Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 15 FITS (267K device-hours) / Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 6 FITS (2,462K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 5 FITS (1,801K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 13 FITS (1,352K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 17 FITS (2.2M device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.7 eV). ...

... Failure Rate: No Life testing in Q1-2014. / Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 5 FITS (2,937K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... 3 Failure Rate: 16 FITS (240K device-hours) 3 Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 11 FITS (1,366K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 7 FITS (1,569K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 89 FITS (3.1M device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... Failure Rate: 12 FITS (4,108K device-hours) ✓ Note: The Exponential Model is used to derive FIT rates (60% Confidence; EA = 0.6 eV). ...

... This allows to use a sinusoidal steady state model of the induction motor, in which the magnitude of the stator flux is proportional to the ratio ...

... Figure 18 shows the equivalent electrical model and plots the frequency response for a ... the package in series with the die can be modeled like an ...

AT88SA100S
(Revision G, 23 pages)

Battery Authentication Chip Not Recommended for New Designs. Replaced by ATSHA204.
2012-09-05

(240KB)
... Chapter 2 Programmer's Model Read this chapter for a description of the programmer's model for the ARM9E-S. ... Chapter 2- Programmer's Model ...
2008-04-01

(4278526)

EMC Improvement Guidelines
(Revision B, 17 pages)

... Figure 18 shows the equivalent electrical model and plots the frequency response for a ... the package in series with the die can be modeled like an ...
2003-08-01
... Device: 17C020 Quantity Tested: 3 Each Voltage Test Method: Mil Std 883, Method 3015 ESD Model: Human Body Test Temperature: 25C ESD ...
1900-01-01

(32109)

ATA6826C
(Revision E, 16 pages)

Triple Half-bridge Driver with Serial Input Control, 3 High-side and 3 Low-side Drivers, 1000mA Current Limitation
2014-06-01

(497 KB)

... Chapter 2 Programmer's Model Read this chapter for a description of the programmer's model for the ARM9E-S. ... Chapter 2- Programmer's Model ...

... featuring the Atmel TSC695—and already over 1,000 flight models with the ... development system for logic synthesis from a VHDL model entry or ...
... Advanced CAD Support: Floor Plan, Proprietary Delay Models, Timing Driven ... used to create a customer specific simulation model and metallisation ...
2005-06-01

(225424)

MG2RTP
(Revision M, 13 pages)

... Advanced CAD Support: Floor Plan, Proprietary Delay Models, Timing Driven ... used to create a customer specific simulation model and metallisation ...
2006-06-01

(166981)

MH1RT
(Revision K, 20 pages)

... cores (preliminary place and route) so that an underlayer layout model can be ... These cells are well characterized by use of SPICE modeling at the ...
2007-11-01

(238878)

... This chapter will give a brief introduction to the OSI mode for the Ethernet networking layers. 2.1 OSI Model The OSI model ...

... This chapter will give a brief introduction to the OSI mode for the Ethernet networking layers. 2.1 OSI Model The OSI model ...

... Level 5 ESD (human body model); pins 2, 12, 13 vs. GND ESD (human body model), all other pins ... 8kV 5kV CDM (charged device model) ...
For over 25 years, Atmel has been a leading supplier providing highly integrated solutions to the Aerospace industry.
2015-06-01

(785 KB)

... Page 7. 7 ATA6612/ATA6613 [APPLICATION NOTE] 9229B–AUTO– 05/15 1. Equivalent Circuit Model of the Capacitor In ...
... Page 7. 7 ATA6612/ATA6613 [APPLICATION NOTE] 9229B–AUTO– 05/15 1. Equivalent Circuit Model of the Capacitor In ...
2015-05-01

(650 KB)

... cores (preliminary place and route) so that an underlayer layout model can be ... These cells are well characterized by use of SPICE modeling at the ...

... For example if a unit only can be guaranteed to work correctly together with a certain model of another unit, it needs to make sure what model it is. ...
This application note describes how to install and use a AT8xC51SNDx device with a Linux ® system.
2005-09-01

(525508)
... Optimized reader/tag performance coupled with low cost software licensing model ... The CryptoRF family of tags consists of 7 models with user ...
1900-01-01

(204377)

... With worldwide sales of over 3000 flight models featuring the Atmel TSC695—and already over 1000 flight models with the Atmel AT697F—the ...

... Advanced CAD Support: Floor Plan, Proprietary Delay Models, Timing Driven ... used to create a customer specific simulation model and metallisation ...
... With worldwide sales of over 3000 flight models featuring the Atmel TSC695—and already over 1000 flight models with the Atmel AT697F—the ...
2015-06-01

(312 KB)

... 30:07 picassso kernel: scsi0 : SCSI emulation for USB Mass Storage devices Oct 31 16:30:07 picassso kernel: Vendor: Generic Model: SND1 MP3 ...

... Table 1-1. Target Coil Inductance for M1330 Chip Version (330pF ±3% on Chip) L = 4.90mH at 125kHz Coil Model No. ... Coil Model No. ...

... Advanced CAD Support: Floor Plan, Proprietary Delay Models, Timing Driven ... used to create a customer specific simulation model and metallisation ...
Using encryption (SHA-256) in a way that enables a slave to authenticate towards a master. E.g. to make sure the connected slave is a legit accessory for the master.
2012-09-13

(165KB)

... Table 1-1. Target Coil Inductance for M1330 Chip Version (330pF ±3% on Chip) L = 4.90mH at 125kHz Coil Model No. ... Coil Model No. ...
2015-07-01

(98 KB)

... In order to be considered a COM port, the USB device declares 2 interfaces: (1) Abstract Control Model Communication, with 1 Interrupt IN endpoint ...
... In order to be considered a COM port, the USB device declares 2 interfaces: (1) Abstract Control Model Communication, with 1 Interrupt IN endpoint ...
2004-06-01

(194317)

... is always possible to track and trace the exact model from which ... reliable, compact and targeted source code The Unified Modeling Language (UML ...

... This allows to use a sinusoidal steady state model of the induction motor, in which the magnitude of the stator flux is proportional to the ratio ...
... is always possible to track and trace the exact model from which ... reliable, compact and targeted source code The Unified Modeling Language (UML ...
2004-01-01

(219090)
This application note explains how to write a custom loadable driver module for the Linux kernel. Common mechanisms like module parameters, initialization and cleanup are explained in detail.
2008-07-01

(10898)

... real converters with static errors can be modeled as follows ... Figure 2-3. Static Error Models ... ADCs are assumed to be monotonic in the model used in ...

Data Converter Terminology
(Revision C, 22 pages)

This application note defines a number of key parameters related to data converters (ADC and DAC) and discusses the extent to which they can be tested. Equations are given to evaluate all key values. ...
2010-01-22

(421861)

... reference. 6- layer model: Layer 1---Signal (Microstrip), components side ... plane Layer 6---Signal (Microstrip) 8- layer model: ...

CryptoAuthentication Product Uses
(Revision B, 18 pages)

CryptoAuthentication Product Uses
2009-03-01

(557595)

SAMA5D2 Layout Recommendations
(Revision A, 16 pages)

This application note provides elemental layout recommendations for some critical components in the SAMA5D2 platform, and gives out layout examples for SAMA5D2 with various package types.
2015-10-16

(429 KB)

... A β(jω) XTAL1/ TOSC1 XTAL2/ TOSC2 Internal External CL1 CL2 Page 4. 4 AVR4100 Atmel-8333E-AVR-03/2015 2.3 Electrical model ...
... Consumable Authentication/Anti In this use model, the ATSHA204 device is ... explore several of these use models using the Atmel ATSHA204 ...
2013-02-19

(188KB)

... The ATF1500(A) fitter can also output a Verilog timing model for simulation using other Verilog simulators. ... 15 Figure 9. ATF1500(A) Timing Model ...
This Application Note describes the ATF1500/A architecture, power/speed management features and software support. Examples are given to show how to use the macrocell features in the ABEL and CUPL high...
1999-09-01
This application note summarizes the crystal basics, PCB layout considerations, and how to test a crystal in your application. A crystal selection guide shows recommended crystals tested by experts an...
2015-03-06

(1MB)

... Mouse, etc. – Audio: USB Desktop speaker, recorder. – CDC: Abstract Control Model, Remote NDIS ... • Linux (see Linux ...

... Chapter 2 Programmer's Model Read this chapter for details of the programmer's model and ARM926EJ-S registers. ... Programmer's Model ...
This document may have been updated by ARM®, please check the ARM web site for its latest version.
2004-01-01

(1702424)

... 2015 3 3 1 SAM D21 Power Domains and Low Power Models Figure 1-1. Power Domain Overview The SAM D21 has power ...
This application note describes the usage of various peripherals in Standby Sleep mode for SAM D microcontrollers.
2015-07-10

(339KB)

ATA6832C
(Revision F, 17 pages)

Triple Half-bridge Driver with Serial Input Control and 25kHz PWM Input, three High-side and three Low-side Drivers, 1000mA Current Limitation, Dedicated for High Temperature Applications with Tjuncti...
2015-02-01

(561 KB)
This document introduces basics for USB composite device and gives examples to implement the composite device that has two functions included, based on the Atmel AT91 SAM Softpack for its ARM Thumb ba...
2009-07-01

(921807)

ATA5749/ATA5749C
(Revision J, 26 pages)

Fractional-N PLL Transmitter IC
2015-07-01

(863 KB)
This Application Note describes the implementation of a PCMCIA interface on an AT91RM9200 Development Kit using the EBI. Hardware connections and programming examples to access a CompactFlash Memory C...
2004-04-01

(187030)

... Determination of the Thermal Model ... Thermal Model Determination of the Device Mounted on the PCB ...
... Determination of the Thermal Model ... Thermal Model Determination of the Device Mounted on the PCB ...
2012-10-01

(486 KB)

... ESD (Human Body Model) for pins 2, 12, 15 (QFN18) versus GND HBM: AEC-Q100-002-Ref-D CEI/IEC 60749-26:2006 ESDA/JEDEC JS-001 ...

... by the Atmel partner Precision Design Associates (PDA) and it contains: • A 2.8 inch LCD display from Displaytech Ltd (model SDT028ATFT) • ITO ...
Article Reprint from Microprocessor Report, July 14, 1997 issue
1998-02-01

... Tamb2 175 °C ESD (Human Body Model ESD S5.1) every pin excluding pin 5 (ANT1) ... ESD (Human Body Model ESD S5.1) for pin 5 (ANT1) ...
This Application Note describes how to utilize the advantages of the 8-bit AVR architecture and the development tools to achieve more efficient c Code than for any other microcontroller.
2004-01-01

(143596)
The Atmel mXT143E Xplained is an add-on board for the Xplained evaluation and demonstration kits. The board contains a 2.8” LCD display with Atmel ATmXT143E capacitive touch screen controller, ITO sen...
2013-05-22

(816KB)

ATSAMR21G18-MR210UA
(Revision B, 21 pages)

... VESD ESD robustness Modules I/O's routed to SAM R21 Human Body Model 4 kV Charged Device Model 550 V PRF Input RF level +10 dBm 4.2. ...
2015-09-21

(373KB)
General information of the Atmel FPGA Integrated Development System (IDS).
2001-06-01
This document may have been updated by ARM®, please check the ARM web site for its latest version.
2001-04-01

... http://www.bertos.org/discover/license Page 7. 4 Getting started with BeRTOS This section explains the BeRTOS programming model. ...

... The defined symbol is dependent on the processor version (-v0, -v1 etc), the memory model (-mt, -ms, etc) and the compiler version, so the symbol ...

... such a device. Keyboardio are the makers of the Model 01, an heirloom-grade keyboard for serious typists. It features a ...
... http://www.bertos.org/discover/license Page 7. 4 Getting started with BeRTOS This section explains the BeRTOS programming model. ...
2011-03-01

ATSAMR21B18-MZ210PA
(Revision B, 18 pages)

... GND -0.3V Vcc+0.3VV VESD ESD robustness Module IO's routed to ATSAMR21 Human Body Model Charged Device Model 4 550 kV V ...
2015-09-23

(513KB)

... VESD ESD robustness Modules I/O's routed to SAM R21 Human Body Model 4 kV Charged Device Model 550 V PRF Input RF level +10 dBm 4.2. ...

... Proof has been furnished that the requirements according to Automotive SPICE® Process Assessment Model Version 3.0 are fulfilled. ...

... SNA Operating Model The SNA is able to operate in two modes: ... Figure 1 SNA Operating Model The available controls include: ...

... The difference in the Data Abort models affects only a very small section of ... With the base restored Data Abort model, when a Data Abort exception ...
Covers how to get started and incorporate into an application, general design and use patterns, and the integration details required if CryptoAuthLib is to be ported into a hardware platform not curre...
2016-01-12

(852KB)

... SNA Operating Model The SNA is able to operate in two modes: ... Figure 1 SNA Operating Model The available controls include: ...
2007-08-01

(1458150)

... GND -0.3V Vcc+0.3VV VESD ESD robustness Module IO's routed to ATSAMR21 Human Body Model Charged Device Model 4 550 kV V ...
Lists the latest programming support information for Atmel's PLDs and any programming problems for programmers in Acrobat Reader (PDF) format.
2002-10-01

(15088)

... used for develop- ment purposes where a PC program models a specific ... the fundamental architecture, instruction set, and memory model can be ...

... of different duty cycled sensor loads on the slave node can be seen in Figure 1-6 on page 6. Steady state sensor load currents are modeled using a ...

ATA6838C
(Revision G, 18 pages)

Hex Half-bridge Driver with Serial Input Control, 950mA Current Limitation
2015-02-01

(511 KB)

ATAN0049: Two-wire LIN Networking
(Revision B, 16 pages)

... of different duty cycled sensor loads on the slave node can be seen in Figure 1-6 on page 6. Steady state sensor load currents are modeled using a ...
2015-04-01

(1,176 KB)
This Application Note uses the AT89C2051 to implement an imaginary processor with a unique architecture and instruction set.
1997-12-01


... NOTE] Atmel-8984B-CryptoAuth-CryptoAuthLib-ApplicationNote_012016 1 3 13 4 CryptoAuthLib Object Model Although ...

... Typically all batteries of the same model will have the same key preloaded and the host maybe a couple of keys for different battery models. ...

... such a device. Keyboardio are the makers of the Model 01, an heirloom-grade keyboard for serious typists. It features a ...
This document describes an implementation of a smart battery for the Atmel SB201-1 and SB201-2 reference designs, explaining how to gain optimal safety and accuracy for a Lithium-Ion rechargeable batt...
2009-08-01

(384843)

... 1. Refer to Power Dissipation Rating section 2. According to specifications MIL-883-Method 3015.7 (HBM - Human Body Model) / JESD22 A115 ...
2010-04-01

(11875974)

AVR32UC Technical Reference
(Revision F, 159 pages)

... 7 32002F–03/2010 AVR32 2. Programming Model This chapter describes the programming model and the set of registers accessible to the user. ...
2010-03-01

(1129853)

... Software Model Resources ... Atmel® has provided initial models of a microcontroller perfectly matching the requirements of an advanced IBS system. ...

... Note: QT3 Xplained Pro requires a compatible Xplained Pro MCU board. See the Related Tools tab for supported models. ...
This application note is a description of a USB Mass Storage device, using High Speed USB for communication and a SD/MMC-card for storage. By default the code is compiled to run at the EVK1104 referen...
2010-02-01

(13005734)

... See the Related Tools tab for supported models. Buy Now. QT4 Xplained Pro 详细信息. ... Three models are available: US, EU and Chinese standards. ...

... Take care to define the correct value to EETIM_VALUE for EEPROM access and define the correct memory model used with your compiler ...

... Modeling or predicting radio wave behavior in a real-world environment is an ... evaluation, it is important, however, to have a better model of the ...

Atmel AVR10006: XDK – User Guide
(Revision B, 32 pages)

The Atmel® Studio Extension Developer’s Kit (XDK) supports 3rd parties to independently extend the Atmel Studio 6 platform with both development tools and embedded software and prepares them for submi...
2012-11-22

(1523KB)
Detailed level explanation of secure boot with Atmel ATSHA204.
2012-09-19

(90KB)

... A summary of the programming model, instruction set, and MPU is pre- sented. ... 22 32059L–AVR32–01/2012 AT32UC3B 6.4 Programming Model ...

AT86RF212B
(Revision E, 212 pages)

Low Power 700/800/900 MHz Transceiver for ZigBee, IEEE 802.15.4, 6LoWPAN, and ISM Applications.
2015-02-10

(5.4MB)

AT86RF233
(Revision E, 225 pages)

Ultra Low Power 2.4GHz Transceiver for IEEE 802.15.4, ZigBee, and ISM Applications
2014-07-14

(4.5MB)

ATUCL3U/L4U Series
(Revision D, 963 pages)

ATUC256L3U, ATUC128L3U, ATUC64L3U, ATUC256L4U, ATUC128L4U, ATUC64L4U
2013-06-19

(11.6MB)

ATmega644/1284/2564RFR2
(Revision B, 607 pages)

Page 1. 1 42073B-MCU Wireless-09/14 ATmega2564/1284/644RFR2 8-bit Microcontroller with Low Power 2.4GHz Transceiver for ZigBee and ...
2014-09-30

(5.37MB)

AT32UC3L0 Series
(Revision C, 852 pages)

AT32UC3L0256, AT32UC3L0128
2013-06-20

(10.3MB)

... A summary of the programming model, instruction set, and MPU is pre- sented. ... 23 32099I–01/2012 AT32UC3L016/32/64 4.4 Programming Model ...

AT32UC3A3/A4 Series
(Revision H, 1021 pages)

AT32UC3A3256, AT32UC3A3256S, AT32UC3A3128, AT32UC3A3128S, AT32UC3A364, AT32UC3A364S,AT32UC3A4256, AT32UC3A4256S, AT32UC3A4128, AT32UC3A4128S, AT32UC3A464, AT32UC3A464S
2012-10-19

(15.2MB)

AT32UC3A0/A1 Series
(Revision K, 826 pages)

AT32UC3A0512, AT32UC3A0256, AT32UC3A0128, AT32UC3A1512, AT32UC3A1256, AT32UC3A1128
2012-03-08

(19.7MB)

ATmega64/128/256RFR2
(Revision C, 611 pages)

Page 1. 1 8393C-MCU Wireless-09/14 ATmega256/128/64RFR2 8-bit Microcontroller with Low Power 2.4GHz Transceiver for ZigBee and ...
2014-09-30

(5.4MB)

AT32UC3C Series
(Revision D, 1316 pages)

AT32UC3C0512C, AT32UC3C0256C, AT32UC3C0128C, AT32UC3C064C, AT32UC3C1512C, AT32UC3C1256C, AT32UC3C1128C, AT32UC3C164C, AT32UC3C2512C, AT32UC3C2256C, AT32UC3C2128C, AT32UC3C264C
2012-03-08

(19.6MB)

... all batteries of the same model will have the same key preloaded, and the host may have a couple of keys to support different battery models. ...
... Take care to define the correct value to EETIM_VALUE for EEPROM access and define the correct memory model used with your compiler ...
2001-03-01

(11785)

This is an overview of basic tag antenna tuning
2012-12-10
... 2.3 QT2160 Programming Model All communication with the QT2160 takes place via a set of addressable, 8-bit registers. ...
2008-07-01

(148184)
... Here are five typical use models for passwords, possible security concerns, and ways in which the ATSHA204 addresses these concerns. ...
2011-04-01

(81016)
This paper begins by introducing the Friis Transmission Equation and examining the terms comprising it. Then, real-world environmental factors which influence RF communication range and how they affec...
2015-07-01

(240 KB)

... ESD (Human Body Model) ESD S 5.1 4kV CDM (Charge Device Model) ESD STM5.3 750V for corner pins (SO package only) 500V all other pins ...
This document describes an example Smart Battery implementation using the Atmel® ATAVRSB202 evaluation kit. The implementation demonstrates how to use the Atmel ATmega16HVB/32HVB to gain optimal safet...
2011-03-01

(5351528)

This document may have been updated by ARM®, please check the ARM web site for its latest version.
2000-03-01

(942155)

... 1. Refer to Power Dissipation Rating section 2. According to specifications MIL-883-Method 3015.7 (HBM - Human Body Model) / JESD22 A115 ...

ATA8520
(Revision H, 23 pages)

Single Chip SIGFOX™ ready RF Transmitter 868MHz
2015-11-01

(795 KB)

... With: private void button1_Click(object sender, RoutedEventArgs e) { //Get Visual Studio automation object model var myDte = (DTE)Package ...

ATA6831C
(Revision E, 17 pages)

Triple Half-bridge Driver with Serial Input Control and 25kHz PWM Input, three High-side and three Low-side Drivers, 1000mA Current Limitation
2015-02-01

(561 KB)

... which require identification of the receptacles, cable assembly or, if the cable is captive, the A connector, and manufacturer and model identifier of ...

... which require identification of the receptacles, cable assembly or, if the cable is captive, the A connector, and manufacturer and model identifier of ...
... Certificate Holder: ATMEL Automotive GmbH Theresienstraße 2 74025 Heilbronn Germany Model(s): ATA8520-EK4E/-EK5-E/-EK6-E ...
2016-07-01

(412 KB)

... microprocessor. Modeled after a kitchen oven, I wanted the controller to have a knob for setting the desired temperature. ...
... Certificate Holder: ATMEL Automotive GmbH Theresienstraße 2 74025 Heilbronn Germany Model(s): ATA8520-EK1-E/-EK2-E/-EK3-E ...
2015-11-01

(428)

... This version requires you to implement delays for programming opera- tions by modeling them as a specific number of JTAG clock TCK periods. ...
... LABEL1 Product Name: RCB256RFR2 XPRO Extenstion Model: ATRCB256RFR2-XPRO FCC ID: VW4A092007 $ >_ A11-0225 TEST1 A12- ...
2014-06-20

(4.5MB)
This Application Note describes our enabling technology to make adaptive hardware possible for Data Acquisition, Logic Analyzer, and other instrumentation products.
1999-09-01

... Page 2. FPGA 2 necessary to allow for easy modeling of device characteris- tics for the artificial intelligence required in the partitioning of a design. ...

... The MPU implemented in the SAM3/4 series supports the standard ARMv7 Protected Memory System Architecture (PMSAv7) model. ...
This Excel spreadsheet provide summary information on emulation support for Atmel 80C51 microcontrollers
2003-11-01

(148480)

... LABEL1 Product Name: RCB256RFR2 XPRO Extenstion Model: ATRCB256RFR2-XPRO FCC ID: VW4A092007 $ >_ A11-0225 TEST1 A12- ...

... changed to be more reliable - PMC driver now supports setting generated clocks on sama5d2 - Add support for new memory models to at25 driver ...
This documents provides a detailed description on configuration and usage of Zigbee Cluster Library(ZCL) Attribute Reporting with BitCloud SDK.
2015-01-14

(479KB)

ATA6843/ATA6844
(Revision D, 6 pages)

Estimated Junction Temperature Rise Due to Power Dissipation during Operation
2015-04-01

(207 KB)
... In addition to the technical advantages of the AVR32, one of the major benefits of this new core is to rely on a license-free model. AVR32 is an ...
2006-10-01

(1404887)
This application note aims at describing and understanding the lwIP stack, in order to quickly design efficient connected applications. The various lwIP APIs will be discussed in depth as well as port...
2014-03-07

(621KB)

... changed to be more reliable - PMC driver now supports setting generated clocks on sama5d2 - Add support for new memory models to at25 driver ...
2009-06-01

(7826)
A list of programmer manufacturers supporting AtmelEPROMs
1998-10-01
... applications during 2012 and expect continued growth during 2013 as customers accelerate their use of capacitive touch in new car models. ...
2013-03-29

(46.1KB)
This application note describes how a Watch dog timer reset can be debugged.
2016-04-18

(3.8MB)

... the basic hardware and software requirements to build such a system based on a C51 product (or C251 product configured for C51 memory model ...
2000-01-01

(7313)

... Depending on the model of the kit, the board is equipped with either an AT91SAM7X256 or an AT91SAM7XC256 (100-pin LQFP Green package ...

... 2. Software The LCD driver is written entirely in C and compiles under Micro-C (from Dunfield Development Systems) using the tiny memory model. ...

... Certificate Holder: ATMEL Automotive GmbH Theresienstraße 2 74025 Heilbronn Germany Model(s): ATA8520-EK4E/-EK5-E/-EK6-E ...
The development board for the ATA6661/ATA6662 (ATA6661-EK, ATA6662-EK) is designed to give designers a quick start with these ICs and for the prototyping and testing of new designs.
2015-06-01

(366 KB)

C51 C251 Microcontrollers. Emulators available. Available - Internet. A, B, C, D, E, F. 1, Part-number, Package, Vendor, Model, Adapter, Emulation Type ...
... for TPI in programming dialog in AVR Studio QT600 support for TPI in programming dialog in AVR Studio Simulator2 model for: ATmega16HVA2 ...
2009-12-01

(1388)

... Certificate Holder: ATMEL Automotive GmbH Theresienstraße 2 74025 Heilbronn Germany Model(s): ATA8520-EK1-E/-EK2-E/-EK3-E ...

... available in C. Since version 2.0, AVR assembler also has a preprocessor modeled after the C preprocessor. This allows ...

... A more accurate model of the chip's temperature distribution including hot spots or temporary effects is beyond the scope of this note. ...

... To be compatible with the new generation of 8-bit AVR microcontrollers (ie ATmega169), the register mapping had been re-modelled. ...

ATA6663/ATA6664 Development Board
(Revision B, 8 pages)

The development board for the ATA6663/ATA6664 (ATA6663-EK, ATA6664-EK) IC is designed to give designers a quick start with these ICs and to enable prototyping and testing new LIN designs.
2015-06-01

(387 KB)

... on antenna behavior. Sophisticated modeling tools can provide detailed analysis and match values. However, they are ...

... According to ARM® "Cortex®-M0+ Devices Generic User Guide" under "Home > The Cortex-M0+ Processor > Exception model > Exception entry ...

... Features • Turnkey solution with small form factor • Three models following either US, EU, or Chinese standards • AC input 90-265V and 50/60Hz ...

... It is expected from the user to understand the basic concept described in the Open Systems Interconnection (OSI) model along with the TCP/IP ...
The AT91SAM7X-EK evaluation kit enables evaluation capabilities and code development of applications running on the AT91SAM7X or the AT91SAM7XC microcontroller.
2007-03-01

(583493)
This application note outlines the steps necessary to optimize analog to digital conversions on AT32UC3A0/1, AT32UC3A3 and AT32UC3B0/1 series.
2009-11-01

(106413)

... is a related collection of attributes and commands which together define a communications interface between two devices, in the server-client model ...
This Application Note describes differences to be aware of when migrating from the ATmega128 to the AT90CAN128 Microcontroller.
2004-03-01

(565560)

... triggers on both flanks 12515 - Xmega16D4 is not setting ADC MUX registers 14565 - Wrong PC mask in ATmega32 model 14622 - Timer 0 output ...
... task ensures that only the correct type of battery is used, and will thus handle problems related to dangerously incompatible models and counterfeit ...
2003-02-01

(118708)

AT40KEL-DK Design Kit Content
(Revision E, 5 pages)

... Verilog RTL simulation and post place and route simulation) and the LeonardoSpectrum (logic synthesis from a VHDL/Verilog model entry), the ...
2007-05-01

(1217760)
... Reflection problems and spectral spreading • Trace ringing IBIS model can be used to determine the correct value for the resistors according to ...
2010-07-01

(163255)
... triggers on both flanks 12515 - Xmega16D4 is not setting ADC MUX registers 14565 - Wrong PC mask in ATmega32 model 14622 - Timer 0 output ...
2011-09-01

(1336)

... Page 3. EPROM 3 LOGICAL DEVICES Device ALLPRO088 ALLPRO040 ALLPRO 88XR HUSKY GANGRO - 8+ GANGRO -S MODEL II XPRO ...
... Simulator 2 models for: ATxmega32A4, ATxmega16A4, ATxmega32D4, ATxmega16D4, ATtiny10(New revision), ATtiny9, ATtiny5, ATtiny4 ...
2009-11-01

(2311)
... microprocessor. Modeled after a kitchen oven, I wanted the controller to have a knob for setting the desired temperature. ...
2004-06-01

(463327)

Atmel AT16802: Antenna Tune Up
(Revision A, 24 pages)

This document endeavors to inform Engineers how to tune 2.4GHz Antennas. This example matches a 2.4GHz chip antenna that could be used for ZigBee, Wi-Fi, or Bluetooth Radios. A Vector Network Analyzer...
2016-05-12

(1.8MB)

... the basic hardware and software requirements to build such a system based on a C51 product (or C251 product configured for C51 memory model ...
... emphasis on our core businesses, sharper focus on our traditional end markets, and a substantially improved operating model with consistent ...
2015-03-25

(36.4KB)

... They offer fast, inexpensive high-capacity data storage, sophisticated user interfaces, and sophisticated modeling and software development tools. ...
This Application Note describes a method for high-speed bidirectional data transfer between an AVR Microcontroller and an of-the-shelf IBM (R) PC-compatible desktop computer, using its Enhanced Parall...
2002-02-01

(73938)

University T-Shirt Design Content
This Application Note describes our enabling technology to make adaptive hardware possible for electronics systems.
1999-09-01

... Verilog RTL simulation and post place and route simulation) and the LeonardoSpectrum (logic synthesis from a VHDL/Verilog model entry), the ...

... The chip load is often modeled as a resistance at its highest current usage, usually either at power-up reset or during an EEPROM write. Keeping ...

... It is also necessary to allow for easy modeling of device characteristics for the artificial intelligence required in the partitioning of a design. ...

AT91SAM7S64 USB Certification
(Revision A, 34 pages)

This Application Note describes the USB certification process for the AT91SAM7S64 microcontroller that contains a USB V2.0 Full Speed Device. It describes the full USB peripheral environment required ...
2006-02-01

(1458965)

... Simulator 2 models for: ATxmega32A4, ATxmega16A4, ATxmega32D4, ATxmega16D4, ATtiny10(New revision), ATtiny9, ATtiny5, ATtiny4 ...
The Atmel Smart Plug Reference Design provides a system solution for a Wi-Fi enabled power plug. This document describes the hardware design of the smart plug reference design.
2016-07-22

(1.5MB)

... for TPI in programming dialog in AVR Studio QT600 support for TPI in programming dialog in AVR Studio Simulator2 model for: ATmega16HVA2 ...

... This is in order to achieve the best (and most precisely modeled) analog performance, which is not necessarily possible on the smallest geometries ...

... Page 2. 2 AVR32138 32135A-AVR32-11/09 2 System Model Figure 2-1. ADC controller Schematic 3 Acquisition Time (Sample and Hold) ...

AT91SAM9R64 USB Certification
(Revision A, 45 pages)

... which require identification of the receptacles, cable assembly or, if the cable is captive, the A connector, and manufacturer and model identifier of ...
2009-07-01

(11889657)
This application note describes the Conditional Assembly feature present in the 8-bit AVR Assembler version 1.74 and later. Examples of how to use Conditional Assembly are included to illustrate the s...
2008-04-01

(95161)

This Application Note uses the AT89LP2052 to implement a simple digital thermometer system and is applicable to any AT89LP devices.
2011-06-01

(2545)

ATA6836C
(Revision O, 21 pages)

Hex Half-bridge Driver with Serial Input Control, 650 mA Current Limitation
2015-02-01

(718 KB)

... 2-1 Chapter 2 Programmer's Model ... Page 16. Programmer's Model 2-2 © Copyright ARM Limited 2000. All rights reserved. ARM DDI 0180A ...

... are provided to aid the system designer/manufacturer in customizing the TPM setup sequence for the target application and usage/security model. ...

Automotive Compilation
(Revision Vol. 11, 56 pages)

... 11 32 Figure 4. In the talker-queuing model, each frame is mapped to a traffic class using this priority and a port's traffic-class table.2 ...
2015-08-24

(3.04 MB)

Page 1. Automotive Compilation Volume 9, October 2012 Page 2. Page 3. Contents Table of Contents Capacitive Touch ...

... Model-based approaches for the development of automotive applications are ... When considering the profile that models the relationship between ...

SAM4CP16B
(Revision K, 1093 pages)

Page 1. Atmel-43051K-ATPL-SAM4CP16B-Datasheet_22-Sep-16 Description The SAM4CP series belongs to Atmel® │SMART energy portfolio. ...
2016-09-22

(14.84 MB)

SAM B11-MR210CA/MR510CA BLE Module
(Revision D, 26 pages)

... VAIN (2) Analog Input Voltage -0.3 1.5 VESDHBM (3) ESD Human Body Model -1000, -2000(see notes below) +1000, +2000(see notes below) ...
2016-02-17

(679KB)
... oscillation. Tuning capacitors are used to adjust the XO center frequency and control the XO precision for different crystal models. ...
2016-08-18

(1.46 MB)

ATBTLC1000 WLCSP SoC
(Revision E, 56 pages)

... oscillation. Tuning capacitors are used to adjust the XO center frequency and control the XO precision for different crystal models. ...
2016-08-23

(1.44MB)

ATBTLC1000-MR110CA BLE Module
(Revision E, 26 pages)

... 0.3 1.5 V VESDHBM (3) ESD Human Body Model -1000, -2000 (see notes below) +1000, +2000 (see notes below) V TA Storage Temperature ...
2016-08-26

(571KB)

ATBTLC1000 QFN SoC
(Revision D, 57 pages)

... oscillation. Tuning capacitors are used to adjust the XO center frequency and control the XO precision for different crystal models. ...
2016-01-07

(1.9MB)

ATA8520D
(Revision E, 27 pages)

Single Chip SIGFOX™ compliant RF Transceiver 868MHz
2015-11-01

(890 KB)

ATA8520E
(Revision C, 38 pages)

Single Chip SIGFOX™ compliant Dual Mode RF Transceiver for EU (ETSI) 868MHz and US (FCC) 902MHz operation, up- and downlink
2016-09-01

(751 KB)
This user guide contains information that enables implementation of capacitive touch solutions using Peripheral Touch Controller on Atmel® ARM® Cortex®-M0+-based SAM C20 Microcontrollers and Atmel QTo...
2016-07-20

(2.65MB)
This user guide contains information that enables implementation of capacitive touch solutions using Peripheral Touch Controller on Atmel® ARM® Cortex®-M0+-based SAM D Microcontrollers and Atmel QTouc...
2016-11-08

(2.4MB)
... Select “EVK1XXX Virtual Com Port” from the models listed in the following input dialog and press Next> to install the driver as shown in Figure 1-11. ...
2015-03-01

(5,961 KB)
The aim of this document is to provide a step by step guide on how to implement SleepWalking on an Atmel ARM Cortex-M4 MCU, from the SAM4L product family.
2014-06-11

(3.9MB)

... each time. We model this functionality by the reception (or lack thereof) of an RF message. Page 14. ATAN0002: ATAK51001 ...
2015-07-01

(2,437 KB)

ATC18RHA
(Revision G, 16 pages)

... Pads pre-placement P2def Atmel Periphery check COP Atmel IBIS model Genibis Atmel Physical implementation Blocks Preplacement Silver Atmel ...
2011-02-01

(162360)
... The processor implementation is the European Space Agency (ESA) SPARC V8 LEON2 fault tolerant model also known as AT697F for the Atmel ...
2014-03-27

(7.62 MB)