入门指南

为您提供开始评估和使用此产品之前所需了解的全部信息。




Buy Now

The Atmel® | SMART SAM L21 Xplained Pro evaluation kit is ideal for evaluating and prototyping with the ultra low power Atmel SAM L21 ARM® Cortex®-M0+ based microcontrollers. Extension boards to the SAM L21 Xplained Pro can be purchased individually.

The ATSAML21-XPRO-B evaluation kit does not include extension boards.

To begin configuring software for your board, please visit our web-based software configuration tool Atmel START. You can also download pre-compiled demos for your board here. Below you will also find a selection of pre-built demo binaries that can be run by downloading them to the mass storage device that appears when you connect the board to your computer.

关键特性

  • ATSAML21J18B microcontroller
  • One mechanical reset button
  • One mechanical user pushbutton
  • One yellow user LED
  • Backup battery
  • 32.768kHz crystal
  • USB interface, device and host mode
  • Three Xplained Pro extension headers
  • One QTouch® button
  • Embedded Debugger — Auto-ID for board identification in Atmel Studio. One yellow status LED. One green board power LED. Symbolic debug of complex data types including scope information. Programming and debugging, including power measurement. Data Gateway Interface: SPI, I²C, 4 GPIOs. Virtual COM port (CDC).
  • USB powered
  • Supported with application examples in Atmel Software Framework


订购码 Atmel 商店可用性1 单价2 网上购买
ATSAML21-XPRO-B



1Backlog orders can be placed for items currently not available.
2Suggested retail price per unit for budgetary use only.

 

软件
说明
LED Flasher
LED Flasher
(1.20 KB, 更新时间 2016年, 三月)
This pre-built demo will make the User LED on the board flash. Download the file to the mass storage device that appears when you connect the board to your computer to run it. The project files for this demo can be downloaded from Atmel START
LED Switcher
LED Switcher
(1.46 KB, 更新时间 2016年, 三月)
This pre-built demo will turn the User LED on/off then the User Button is pressed. Download the file to the mass storage device that appears when you connect the board to your computer to run it. The project files for this demo can be downloaded from Atmel START
USB HID Mouse
USB HID Mouse
(8.56 KB, 更新时间 2016年, 三月)
This pre-built demo requires an OLED1 extension board to be connected to the EXT2 header. Connecting the board to the computer using the Target USB connector will make it emulate a mouse over USB HID. Use button 1 & 3 on the OLED1 board to move the pointer left/right. Download the file to the mass storage device that appears when you connect the board to your computer to run it. The project files for this demo can be downloaded from Atmel START

Contents : ATSAML21-XPRO-B MCU board